To catalogue
Nylene® 404
- Chemical Family
- Polyamides
Nylene General purpose un-reinforced, heat stabilized nylon 6 injection molding resin High flow characteristics at minimal processing temperatures Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding
Product families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Nylene
- Polymer Name
- Polyamide 6 (PA 6)
- Flexural Modulus
- 2690.0 - 2690.0 MPa
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Applications
Consumer Goods — Other Consumer Goods Applications
- Flame Rating
- UL 94 V2
- Technology
- Plastics
- Material Features
- General Purpose
- Good Moldability
- Heat Stabilized
- High Flow
- Country Availability
- Canada
- USA
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- General Purpose
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 79 | MPa | ISO 527 |
| Elongation at Break | 40 | % | ASTM D 638 |
| Flexural Modulus | 2690 | MPa | ASTM D790 |
| Izod Notched Impact Strength (23°C) | 43 | kJ/m2 | ISO 180/1A |
| Izod Notched Impact Strength (-40°C) | 16 | J/m | ASTM D256 |
Table 2 of 4
2 rows| Characteristic | Value | Method |
|---|---|---|
| Molding Shrinkage | 0.012 | ISO 294-4 |
| Specific Gravity | 1.14 | ASTM D 792 |
Table 3 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deflection Temperature Under Load - DTUL (1.82 MPa) | 68 | °C | ASTM D648 |
| Deflection Temperature Under Load - DTUL (0.45 MPa) | 182 | °C | ASTM D648 |
| Melting Point | 215 | °C | ASTM D3418 |
Table 4 of 4
1 row| Characteristic | Value | Method |
|---|---|---|
| Flammability Rating (All colors at 1.47 mm) | V-2 | UL 94 |
