To catalogue
Nylene® 204 HS
- Chemical Family
- Polyamides
Nylene Heat stabilized version general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Furniture; Consumer Goods — Other Consumer Goods Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
- Other Automotive Applications
- Powertrain & UTH
- Seating
Automotive & Transportation — Bonding & Assembly
- Other Bonding & Assembly Applications
Building & Construction — Building Materials
- Structural Components
Industrial — Chemical & Industrial Manufacturing
- Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Nylene
- Polymer Name
- Polyamide 6 (PA 6)
- Flexural Modulus
- 2760.0 - 2760.0 MPa
- Additives Included
- Heat Stabilizer
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Material Features
- Dimensional Stability
- Fast Molding Cycle
- General Purpose
- Heat Stabilized
- Country Availability
- Canada
- USA
- Plastics and Elastomers End Uses
- Bushings
- Fasteners
- Furniture
- General Purpose
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 79 | MPa | ISO 527 |
| Flexural Modulus | 2760 | MPa | ASTM D790 |
| Izod Notched Impact Strength (23°C) | 48 | J/m | ASTM D256 |
| Elongation | 60 | % | ASTM D638 |
Table 2 of 3
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Molding Shrinkage | 0.009 | in/in |
| Specific Gravity | 1.13 | — |
Table 3 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deflection Temperature Under Load - DTUL (1.82 MPa) | 66 | °C | ASTM D648 |
| Deflection Temperature Under Load - DTUL (0.45 MPa) | 175 | °C | ASTM D648 |
| Melting Point | 215 | °C | ASTM D3418 |
