To catalogue
Nylene® 615
- Chemical Family
- Polyamides
Nylene Nylon-6 extrusion grade suitable for coating and film co-extrusion applications Excellent melt stability and strength Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177,1500 for direct food contact
Product families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Nylene
- Polymer Name
- Polyamide 6 (PA 6)
- Processing Methods
Casting, Coating, Coextrusion, Extrusion, Extrusion Coating, Film Extrusion
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Abrasion Resistant
- Food Contact Acceptable
- Good Drawdown
- Good Melt Strength
- Good Toughness
- Grease Resistant
- High Melt Stability
- Low Odor
- Country Availability
- Canada
- USA
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Casting
- Coating
- Coextrusion
- Extrusion
- Extrusion Coating
- Film Extrusion
Technical data
Table 1 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Yield | 38 | MPa | ASTM D 638 |
| Ultimate Tensile Strength | 60 | MPa | ASTM D882 |
| Secant Modulus | 652 | MPa | ASTM D882 |
| Elongation | 290 | % | — |
Table 2 of 5
1 row| Characteristic | Value | Method |
|---|---|---|
| Specific Gravity | 1.12 | ASTM D 792 |
Table 3 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Point | 215 | °C | ASTM D3418 |
Table 4 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elmendorf Tear Strength | 56 | g/mil | ASTM D1922 |
Table 5 of 5
1 row| Characteristic | Value |
|---|---|
| FDA/NSF Approved | Yes |
