To catalogue
Nylene® 494P IM
- Chemical Family
- Polyamides
Nylene Specially formulated nylon powder for the ROTOMOLDING process For uses where HIGH IMPACT properties are required Heat stabilized Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying Strongly recommend the use of an inert gas such as nitrogen in the mold to minimize thermal degradation during processing
Properties
- Physical Form
- Pellets
- Powder
Product families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Nylene
- Polymer Name
- Polyamide 6 (PA 6)
- Flexural Modulus
- 596.0 - 596.0 MPa
- Processing Methods
- Rotational Molding
- Technology
- Plastics
- Material Features
- Heat Stabilized
- Impact Resistance
- Country Availability
- Canada
- USA
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Rotational Molding
Technical data
Table 1 of 3
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 53 | MPa | ISO 7619-1 |
| Flexural Modulus | 596 | MPa | ASTM D790 |
| Izod Notched Impact Strength | No Break | ft-lb/in | ASTM D256 |
| Drop Weight Impact (RT) | 125 | ft-lbs | ARM |
| Drop Weight Impact (-20°C) | 115 | ft-lbs | ARM |
| Drop Weight Impact (-40°C) | 90 | ft-lbs | ARM |
| Elongation | 150 | % | — |
Table 2 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage | 0.015-0.020 | in/in | — |
| Specific Gravity | 1.095 | — | ASTM D792 |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Point | 17 | °C | ASTM D3418 |
