To catalogue
Nylene® 132L
- Chemical Family
- Polyamides
Nylene Unreinforced nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Other Consumer Goods Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
- Other Automotive Applications
- Powertrain & UTH
- Seating
Automotive & Transportation — Bonding & Assembly
- Other Bonding & Assembly Applications
Building & Construction — Building Materials
- Structural Components
Industrial — Chemical & Industrial Manufacturing
- Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Nylene
- Polymer Name
- Polyamide 66 (PA 66)
- Flexural Modulus
- 2860.0 - 2860.0 MPa
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Material Features
- Chemical Resistant
- General Purpose
- Good Moldability
- Heat Resistance
- High Flow
- Country Availability
- Canada
- USA
- Plastics and Elastomers End Uses
- Bushings
- Fasteners
- General Purpose
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 83 | MPa | ISO 527 |
| Flexural Modulus | 2860 | MPa | ASTM D790 |
| Izod Notched Impact Strength (23°C) | 53 | J/m | ASTM D256 |
| Elongation | 50 | % | ASTM D638 |
Table 2 of 3
2 rows| Characteristic | Value | Method |
|---|---|---|
| Molding Shrinkage | 0.013 | ISO 294-4 |
| Specific Gravity | 1.14 | ASTM D 792 |
Table 3 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deflection Temperature Under Load - DTUL (264 psi (1.8 MPa)) | 90 | °C | ASTM D648 |
| Deflection Temperature Under Load - DTUL (66 psi (0.45 Mpa)) | 235 | °C | ASTM D648 |
| Melting Point | 254 | °C | ASTM D3418 |
