Omnilube® 2
Omnilube® 2 is a fully synthetic multi-purpose EP grease formulated for use in a wide variety of applications where plastic compatibility is required. Omnilube 2 provides optimum anti-wear performance, mechanical stability, corrosion protection and oxidation resistance under almost all load and speed conditions. This EP grease is water proof and will eliminate the need for multiple special greases. Omnilube 2 does not contain a tackifier.
Product families
Applications
- Equipment & Parts
Product Families
- Greases
Other characteristics
- Brand
- Omnilube
- Features
Anti-Wear Properties, Corrosion Resistant, Extreme Pressure Performance, Friction Reduction, High Dropping Point, Mechanical Stability, Non-tacky surface, Oxidation Resistant, Water Resistant, Wide Temperature Operating Range
- Product Type
- Grease
- Thickener Type
- Aluminum Complex
- Application Area
- Bearings
- Compatible Substrates & Surfaces
- Plastics
- Color
- Yellow
- Markets
- Industrial
- NLGI Grade
- NLGI 2
- Technology
- Ready-to-Use Products
- Base Oil
- Polyalphaolefin (PAO)
- Certification
- ISO 9001:2008 Certfied
- USDA H-2 authorized
- Performance Benefits
Excellent stability: Prevents rust in bearings; High dropping point; Wide temperature range: Pumpable at -40°F and useful to 300°F continuous, 400°F intermittently; Superior for wet conditions; Non-tacky; Extreme pressure properties
- Certifications and Compliance
- ISO 9001
- USDA Certified
- Ready to Use Product Features
- Anti-Wear Properties
- Corrosion Resistant
- Extreme Pressure Performance
- Friction Reduction
- High Dropping Point
- Mechanical Stability
- Non-tacky surface
- Oxidation Resistant
- Typical Industrial Applications
- Sliding Bearings
- Anti-friction Bearings
- Slide Ways
- Low & High Speed Journal Bearings
- General Machinery Lubrication
- All Chassis Points, Ball & Universal Joints
- Wheel Bearings
- King Pins
- Compatible Substrates and Surfaces
- Plastics
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Penetration Worked (60 strokes) | 280.0 | — | ASTM D217 |
| Dropping Point | 500.0 | °F | ASTM D2265 |
| Copper Corrosion | 1b | — | ASTM D4048 |
| Oxidation Stability (Pressure Drop at 100 hrs) | 13.8 | kPa | ASTM D942 |
| Rust Protection | Pass | — | ASTM D1743 |
| Four Ball EP (Weld Load) | 315.0 | Kg | ASTM D2596 |
| Four Ball EP (Load Wear Index) | 57.0 | — | — |
| Thickener | Aluminum Complex | — | — |
| Base Oil | PAO | — | — |
| Base Oil Viscosity (100°F) | 13.8 | — | ASTM D445 |
| Base Oil Viscosity (40°F) | 99.0 | — | ASTM D445 |
| Pour Point | -45.0 | °C | ASTM D97 |
