To catalogue
Chartwell C-515.71/ 1.5H
- CASE Ingredients Features
- Excellent Creep ResistanceLow BlisteringPeel ResistanceSalt Resistance
- Chemical Family
- Organometallics
A high active matter amino functional metal organic adhesion promoter synthesized with a stabilized neutralized metal complex. The product is supplied as a solution in propylene glycol.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Adhesion PromoterCoupling Agent
Product families
Adhesives & Sealants — Building & Construction
- Construction Adhesives
Paints & Coatings — Building & Construction
- Concrete Coatings & Stains
- Wood Coatings & Finishes
Building & Construction — Building Materials
- Construction Adhesives
Industrial — Chemical & Industrial Manufacturing
- Ceramics & Refractory
Paints & Coatings — Industrial Coatings
- Metal Coatings
Other characteristics
- Brand
- Chartwell
- End Uses
2K (2 Component) Adhesive, Epoxy Adhesive, Primer, Waterborne Coating
- Features
Excellent Creep Resistance, Low Blistering, Peel Resistance, Salt Resistance
- Functions
- Adhesion Promoter, Coupling Agent
- Compatible Polymers & Resins
- Epoxies (EP), Polyurethanes (PU)
- Carrier
- Propylene Glycol
- Solvent-based
- Markets
- Adhesives & Sealants
- Building & Construction
- Industrial
- Paints & Coatings
- Procedure
- 1. Water-Borne
- Post add at 0.35 - 1.4 wt% on polymer solids. Mix with conventional paddle-type mixer.
- 2. 2K Epoxy and 2K Urethane
- Optimum performance is achieved when added to the hardener (epoxies) or polyol (urethanes). Product must be high shear mixed with a Cowles type mixer. Milling alone is not sufficient. Use Level 0.35 - 1.4 wt% on polymer solids.
- Application
- Coatings, Adhesives & Inks
- Will improve adhesion to all metals with accompanying improved salt fog resistance, reduction of creep at the scribe, and reduced blistering; AND improved adhesion to ceramics, concrete and wood and plastics (except untreated PP/ PE). In WB Exterior primers and deck stains, will eliminate peeling on wood substrate.
- Water-Borne Coatings
- For acrylic, styrenated acrylic, PUD and alkyd coatings having pH 7-11. Use level 0.35 - 1.4 wt per cent on polymer solids*.
- 2K Epoxy and 2K Urethane
- Always add to hardener (epoxies) or polyol (urethanes). Use level 0.35 - 1.4 wt. per cent on polymer solids*.
- Urethane modified nitrocellulose
- Add with Cowles-type mixing for 10 minutes. Use level 0.35 - 1.4 wt per cent based upon binder solids.
- Coating Type
- Primer
- Waterborne Coating
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- ECL (Korea)
- IECSC (China)
- KECI (Korea)
- TCSI (Taiwan)
- TSCA (USA)
- Adhesive & Sealant Type
- 2K (2 Component) Adhesive
- Epoxy Adhesive
- Certifications and Compliance
Comprehensive Environmental Response Compensations & Liability Act (CERCLA); REACH (Europe)
- Compatible Polymers and Resins
- Epoxies (EP)
- Polyurethanes (PU)
- Compatible Substrates and Surfaces
- Ceramic
- Concrete
- Metal
- Plastics
- Wood
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Active Matter Content | 51 | wt% |
| Complexed Organics | 19.6 - 20.4 | — |
| Specific Gravity | 1.31 | g/ml |
| pH Value (1% Solution) | 7.7 | — |
| Total Metal Content | 7.3 - 7.9 | % |
| Neutralizing Agent | Caustic | — |
| Organofunctionality | Amino | — |
