FluorAcryl 3298
- CASE Ingredients Features
- Excellent Scratch ResistanceHigh Impact ResistanceOil ResistanceSolvent ResistanceWater Resistance
FluorAcryl 3298 is a hydrophobic and oleophobic acrylate that produces hard scratch resistance coatings. This oligomer is compatible with UV/EB curing. FluorAcryl has a high Tg, good water resistance, high impact strength and good solvent resistance.
Identification
- CASE Ingredients Functions
- Anti-Marring Agent
Product families
Applications
- Wood Coatings & Finishes
- Metal Coatings
- Textile Manufacturing
- Electronics Coatings
- Flexography
- Inkjet Printing
- Offset & Lithographic Printing
- Screen Printing
- Electronics Coatings
- Glass Coatings
Product Families
- Surface Modifiers
Other characteristics
- Brand
- FluorAcryl
- End Uses
Flexography Ink, Inkjet Ink, Offset Ink, Radiation Curable Coating, Radiation Curable Ink, Screen Printing Ink
- Features
Excellent Scratch Resistance, High Impact Resistance, Oil Resistance, Solvent Resistance, Water Resistance. FluorAcryl 3298 is a coating used in manufacturing hydrophobic and oleophobic metal, glass and plastic devices. The coating is UV light curable, hydrophobic and solvent resistant. 3298 is applied by metered-rods, gravure, and similar techniques. Cure thin films by irradiating with a medium pressure vapor mercury lamp (220-320 nm, if possible under inert nitrogen) to a pencil hardness of greater than #2 at 3 Joules per square centimeter. The resin may be thinned with acetone and butyl-acetate. Clean up with acetone. Store unused material at room temperature in tightly sealed container. After proper curing, masks have contact angles to water over 100° and have great chemical and solvent resistance.
- Markets
- Electrical & Electronics
- Industrial
- Paints & Coatings
- Printing & Packaging
- Appearance
- Clear liquid
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Technology
- CASE Ingredients
- Ink and Toner Type
- Flexography Ink
- Inkjet Ink
- Offset Ink
- Radiation Curable Ink
- Screen Printing Ink
- Compatible Substrates and Surfaces
- Glass
- Metal
- Plastics
- Wood
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation | 3 | % |
| Modulus | 118000 | psi |
| Oil Contact Angle | over 65° | — |
| Oil Contact Angle | Over 65 | °C |
| Refractive Index | 1.48 | — |
| Specific Gravity | 1.09 | g/cm3 |
| Tensile Strength | 2500 | psi |
| Tg | 130 | °C |
| Viscosity at 60°C | 1100 | cP |
| Water Contact Angle | over 100° | — |
| Water Contact Angle | Over 100 | °C |
