To catalogue
Metoplen 001 PPH Extrusion Natural
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Metoplen 001 PPH Extrusion Natural has applications such as propylene, plastic table, chair production, plastic kitchenware production, ring production, automotive industry, plastic case production, construction industry (insulation, crochet, mat, conical foot etc.), bucket, It is used in flower pot and various toy industry. Monomer of propylene Polypropylene obtained by polymerizing chemical solvents It is extremely resistant to (acids and bases).
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Housewares
- Consumer Goods — Sports & Recreation
Automotive & Transportation — Automotive
- Aftermarket Parts & Components
- Interior
Electrical & Electronics — Wire & Cable
- Building Wires & Power Cables
- Jacketing & Insulation
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Brand
- Metoplen
- Polymer Name
- Polypropylene (unspecified)
- Melt Flow Index
- 5.0 - 8.0 g/10 min
- Processing Methods
- Extrusion
- Color
- Natural
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Cost Effective
- Crystalline
- Electrically Insulating
- Fatigue Resistant
- Good Impact Strength
- Low Friction
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Automotive Applications
- Building Wire Insulation
- Electronic Accessory Cases
- Housewares
- Kitchenware
- Toys
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Fluidity (PP 230°C - 2.16kg, PE 190°C - 2.16kg) | 5 - 9 | 1g/10min | ISO 1133 |
| Density (23°C) | 0.91-0.96 | g/cm³ | ISO 1183 |
| Ash Content | 1 - 6 | % | ISO 247 |
Table 2 of 3
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 28 - 31 | Mpa | ISO 527-1/2 |
| Elongation at Break | 170 - 210 | % | ISO 527-1/2 |
| Tensile Modulus | 1300 - 1400 | Mpa | ISO 527-1/2 |
| Charpy Notched Impact Resistance | 5.5 - 6 | kj/m2 | ISO 179-1 |
| Moisture Content | 0.2 - 0.5 | % | ISO 787-2 |
Table 3 of 3
3 rows| Characteristic | Value | Unit |
|---|---|---|
| MFI (2.16kg/230c.) | 5 - 8 | — |
| Density | 0.95 | gr/cm3 |
| Ash Content | 1 - 6 | % |
