TEXICRYL® 13-818
- CASE Ingredients Features
- Fast DryingImproved FlexibilityLow Cobb ValuesLow FoamingLow Moisture Vapor Transmission Rate (MVTR)
- Chemical Family
- Styrene-Acrylic Copolymer
Texicryl® 13-818 is a recently developed modified acrylic copolymer aqueous dispersion renowned for its remarkable flexibility and MVTR (Moisture Vapor Transmission Rate) properties. Texicryl® 13-818 serves as a prime binder in barrier coating applications, showcasing low MVTR and Cobb values. This product also demonstrates fast drying and low foaming characteristics.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
- Acrylics
Other characteristics
- Brand
- TEXICRYL
- End Uses
- Barrier Coating, Varnishes
- Features
Fast Drying, Improved Flexibility, Low Cobb Values, Low Foaming, Low Moisture Vapor Transmission Rate (MVTR)
- Glass Transition Temperature (Tg)
- 5.0 °C
- Note
*Determined by metal bar with temperature gradient.
- Key Benefits
Modified acrylic copolymer for barrier coating applications with excellent flexibility and low MVTR and Cobb Values.
- Technology
- CASE Ingredients
- Packaging Type
- Bulk
- Drums
- Totes (IBC)
- Labeling Claims
- APEO-Free
- Storage Condition
TEXICRYL® 13-818 should be stored in the original, unopened and undamaged containers in a dry place at temperatures between 5°C and 30°C. Exposure to frost should be avoided
- Applications
Texicryl® 13-818 readily forms strong, coherent films at normal room temperature but inks and varnishes will 'key' more quickly to non absorbent substrates if gentle heat is applied through force drying.; When the use of alcohols is required to control rate of dry, it is advisable to pre-dilute the alcohol with some water and add slowly to the polymer to avoid 'solvent shock'.; Due to the adhesive nature of the vehicle, it is advisable to clean presses as soon as possible after shutdown. Dried films of Texicryl® 13-818 can be removed using commercial cleaners containing a small amount of propylene glycol ether solvent
- Packaging Information
Texicryl® 13-818 is supplied in drums, 1 tonne IBC's or bulk supplies are delivered by road tanker.
- Coating End Applications
- Barrier Coating
- Varnishes
- Certifications and Compliance
- FDA 21 CFR 175.105
- FDA 21 CFR 176.170
- FDA 21 CFR 176.180
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids Content | 47.0 | % |
| Viscosity (at 25°C, Brookfield RVT, Spindle 4, 100 rpm) | 500.0 | mPa.s |
| pH Value | 8.5 | — |
| Particle Size | 100.0 | nm |
| Acid Value | 40.0 | mg KOH/g |
| Minimum Film - Forming Temperature (MFFT)* | max. 0 | °C |
| Glass Transition Temperature | 5.0 | °C |
