Texipol® 63-253
- CASE Ingredients Features
- Low ViscosityWide pH Compatibility
- Chemical Family
- Acrylamides
Texipol® 63-253 is an inverse emulsion thickener known for imparting a very short flow to a wide variety of aqueous and non-aqueous compositions, effective over a broad pH range. Supplied as a low-viscosity liquid, it offers almost instantaneous thickening upon direct mixing into the composition. Its polymer, already in solution as the sodium salt, eliminates the need for additional additives to promote thickening. Texipol® 63-253 finds applications in wallpaper pre-paste adhesives, high build/textured coatings, water-based building adhesives, and PVA adhesives. It can also thicken certain non-aqueous systems such as simple alcohols and glycols.
Properties
- Physical Form
- Liquid
- Effect of pH on Viscosity
Effect of pH on the Viscosity of the 2% Texipol® 63-253 and Water Solution
- Effect of pH on Viscosities
- [2.0% Texipol in Water and at 50 s-1]
Identification
- CASE Ingredients Functions
- Rheology ModifierThickener
Product families
Applications
- Construction Adhesives
- Construction Adhesives
Product Families
- Rheology Modifiers & Stabilizers
Other characteristics
- Brand
- Texipol
- End Uses
- Waterborne Adhesive
- Functions
- Rheology Modifier, Thickener
- Labeling Claims
- APEO-Free
- Compatible Polymers & Resins
- Acrylics, Polyvinyl Acetate (PVA)
- Note
* Brookfield RVT, Spindle #7, 100 rpm at 25°C / 77°F. ** Deionized water thickened with 2% of Texipol® 63-237, as supplied. Brookfield RVT, Spindle #6, 5 rpm at 25°C / 77°F. ***Viscosity measurements taken at room temperature using Brookfield RV viscometer, ⁴Texipol® 63-253: 2% in DI water – Brookfi eld RVT, Spindle 6, 5 rpm, at 25°C.
- Markets
- Adhesives & Sealants
- Building & Construction
- Appearance
- Creamy liquid
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Polymer Charge
- Anionic
- Storage Condition
Texipol® 63-253 should be stored at temperatures between 5-30°C / 41-86°F. If the product freezes, thaw completely by placing the container in a warm water bath and homogenize completely before use. Texipol® 63-253 can be stored in glass, stainless steel, plastic or epoxy-lined vessels. Texipol® 63-253 should not be stored in mild steel, copper or aluminum containers.
- Chemical Inventories
- DSL (Canada)
- EINECS (EU)
- TSCA (USA)
- % Solution In Water
- 2% solutions in water (shear rate, 50 Sec-1)
- Packaging Information
Texipol® 63-253 is available in a 441 lb. net weight steel drum and is imported from the United Kingdom.
- Polymer Compatibility
- Anionic / Non-ionic
- Certifications and Compliance
- ISO 14001
- ISO 9001
- OSHAS 18001
- Viscosity Profile of Water
- [Without pre-shearing at 25ºC]
- Compatible Polymers and Resins
- Acrylics
- Polyvinyl Acetate (PVA)
- Adhesives And Sealants
- Waterborne Adhesive
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | approx. 30 | % |
| Specific Gravity | 1.05 | — |
| pH | 6 - 11 | — |
Table 2 of 2
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Relative Density (at 25°C) | approx. 1.05 | — |
| Inverse Emulsion Viscosity* | max. 5,000 | — |
| Thickened Deionized Water** | min. 150,000 | — |
| Flow of Thickened Compositions | Very short | — |
| Flash Point | min. 100 | °C |
| Optimal pH Usage Range | 60 - 11.0 | — |
| Typical Thickened Viscosity⁴ | min. 45,000 | mPa.s |
| Coating Viscosity*** (at 0.5% active,1.0 rpm) | 76000.0 | cPs |
| Coating Viscosity*** (at 0.5% active, 100 rpm) | 3550.0 | cPs |
