Rainmaker Polymers ACLDSL05NA1
- Chemical Family
- Amides
Rainmaker Polymers ACLDSL05NA1is 5% Slip PEC having higher molecular weight and more thermally stable amides bloom slowly to the surface. Preferred for off-line converting process and specific roll stock applications. Slip concentrates utilize low molecular weight chemicals that bloom the the surface of an article providing surface lubrication. This lubrication helps to reduce friction which minimizes film surface to surface tact and is also beneficial in high speed converting equipment.
Properties
- Physical Form
- Masterbatch
- Solid
Product families
Applications
- Food & Beverage Packaging
Product Families
- Additive Masterbatches
- Performance Additives
Other characteristics
- Carrier
- Low-Density Polyethylene (LDPE), Resin-based
- Low-Density Polyethylene (LDPE)
- Resin-based
- Features
Friction Reduction, Good Thermal Stability, High Molecular Weight, Low Blooming, Reduced Friction
- Functions
- Slip Agent
- Processing Methods
- Extrusion, Film Extrusion
- Markets
- Printing & Packaging
- Technology
- Plastics
- Additives
- Slow Bloom
- Regulatory Data
FDA: The components in this product comply with the following sections of Title 21, Code of Federal Regulations (21CFR): 174.5 178.2010 177.1520; 174.5 178.2010; 177.1520; CONEG: The components of this product are compliant with the current requirements issued by the Coalition of North Eastern Governors (CONEG) requiring less than 100 PPM total in the final product packaging.
- Material Features
- Friction Reduction
- Good Thermal Stability
- High Molecular Weight
- Low Blooming
- Reduced Friction
- HIGHLIGHTS
- Improves surface lubrication
- Lowers coefficient of friction
- Decreases film tact
- Certifications and Compliance
- Coalition of Northeastern Governors (CONEG)
- FDA 21 CFR 174.5
- FDA 21 CFR 177.1520
- FDA 21 CFR 178.2010
- FDA 21 CFR 178.3297
- Plastics and Elastomers Functions
- Slip Agent
- Plastics and Elastomers Processing Methods
- Extrusion
- Film Extrusion
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D792 |
| Melt Flow | 9 | g/10 min | ASTM D1238 |
| Type | LDPE | — | — |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Additive Loading | 5 | % | Internal |
| Dispersion | Film Grade | — | Internal |
| Melt Flow | 12 | g/10 min | ASTM D1238 |
| Pellet Weight | 60 | Pellets/gm | Internal |
