To catalogue
Rainmaker Polymers ACLLAS05NA1
- Chemical Name
- Proprietary Ingredient
Rainmaker Polymers ACLLAS05NA1 is Antistat PEC. Rainmaker Polymers' Antistat Concentrates dissipate surface charges and eliminate the undesirable effects of static build up. It is a Chemical agent that bloom to the polymer's surface where they react with atmospheric moisture resulting in a microscopic layer of water on the surface that will dissipate the static charge.
Properties
- Physical Form
- Masterbatch
- Solid
Product families
Applications
Printing & Packaging — Packaging
- Food & Beverage Packaging
- Non-Food Consumer Packaging
Electrical & Electronics — Parts & Components
- Printed Circuit Boards (PCBs)
Product Families
Plastics — Masterbatches
- Additive Masterbatches
Plastics — Polymer Additives
- Surface Modifiers
Other characteristics
- Carrier
Linear Low Density Polyethylene (LLDPE), Resin-based; Linear Low Density Polyethylene (LLDPE); Resin-based
- Features
Food Contact Acceptable, Good Thermal Stability, High Purity, Static-Dissipative, Statically Conductive
- Functions
- Anti-Static Agent
- Labeling Claims
- Food Contact Acceptable
- Compatible Polymers & Resins
- Polyethylenes (PE)
- Markets
- Electrical & Electronics
- Printing & Packaging
- Technology
- Plastics
- Additives
- Amine
- Regulatory Data
- FDA
- The components of this product are approved by the FDA for safe use in Polyethylene food contact applications subject to specific restrictions.
- CONEG
- The components of this product are compliant with the current requirements issued by the Coalition of North Eastern Governors (CONEG) requiring less than 100 PPM total in the final product packaging.
- Material Features
- Food Contact Acceptable
- Good Thermal Stability
- High Purity
- Static-Dissipative
- Statically Conductive
- HIGHLIGHTS
- Dissipates static charge on the surface
- High temperature stability
- High purity
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- Coalition of Northeastern Governors (CONEG)
- FDA Compliant
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Plastics and Elastomers End Uses
- Containers
- Food Packaging
- Printed Circuit Boards
- Plastics and Elastomers Functions
- Anti-Static Agent
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D792 |
| Melt Flow | 20 | g/10 min | ASTM D1238 |
| Type | LLDPE | — | — |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Additive Loading | 5 | % | Internal |
| Melt Flow | 22 | g/10 min | ASTM D1238 |
| Pellet Weight | 60 | Pellets/gm | Internal |
