Rainmaker Polymers ACLLPA03NA3
- Chemical Family
- Fluoropolymers
Rainmaker Polymers ACLLPA03NA3 is 3% Processing Aid PEC. Processing aids help improve manufacturing thru-put and reduce surface imperfections in polyethylene films. The active processing aid component has an affinity for the metal surfaces and will migrate from the polymer to the extruder barrel and die surfaces. Once at these surfaces, a fine coating is formed that reduces the coefficient of friction between the metal and polymer. The ultimate effect is an improvement in production rates and a reduction in drag induced imperfections such as melt fracture.
Properties
- Physical Form
- Masterbatch
- Solid
Product families
- Additive Masterbatches
- Processing Aids
Other characteristics
- Carrier
Linear Low Density Polyethylene (LLDPE), Resin-based; Linear Low Density Polyethylene (LLDPE); Resin-based
- Features
Cost Effective, Excellent Surface Properties, Fast Production Cycle, Food Contact Acceptable, Freeze Resistant
- Functions
- Processing Aid
- Labeling Claims
- Food Contact Acceptable
- Processing Methods
- Extrusion, Film Extrusion
- Technology
- Plastics
- Additives
- Fluoropolymer
- Regulatory Data
- FDA
- The components in this product comply with the following sections of Title 21, Code of Federal Regulations (21CFR): 174.5 177.1520 Note: Max level of PA in final part may not exceed 0.22%
- 174.5
- 177.1520 Note
- Max level of PA in final part may not exceed 0.22%
- CONEG
- The components of this product are compliant with the current requirements issued by the Coalition of North Eastern Governors (CONEG) requiring less than 100 PPM total in the final product packaging.
- Material Features
- Cost Effective
- Excellent Surface Properties
- Fast Production Cycle
- Food Contact Acceptable
- Freeze Resistant
- HIGHLIGHTS
- Reduces melt fracture
- Increases machine thruputs
- Savings in raw material costs
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- Coalition of Northeastern Governors (CONEG)
- FDA 21 CFR 174.5
- FDA 21 CFR 177.1520
- FDA 21 CFR 178.2010
- FDA 21 CFR 178.3297
- Plastics and Elastomers End Uses
- Film
- Plastics and Elastomers Functions
- Processing Aid
- Plastics and Elastomers Processing Methods
- Extrusion
- Film Extrusion
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D792 |
| Melt Flow | 20 | g/10 min | ASTM D1238 |
| Type | LLDPE | — | — |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Additive Loading | 3 | % | Internal |
| Melt Flow | 18 | g/10 min | ASTM D1238 |
| Pellet Weight | 65 | Pellets/gm | Internal |
