Rainmaker Polymers ACLLAB50NA1
- CAS Number
- 14808-60-7
- EC Number
- 238-878-4
- Chemical Name
- Quartz (SiO2)
Rainmaker Polymers ACLLAB50NA1 is 50% DE Antiblock PEC. Antiblock concentrates incorporate inorganic components that microscopically "roughen" the surface of blown and cast films. These roughened surfaces minimize the surface contact area between the films and decrease the tendency of these surfaces to adhere to one another.
Properties
- Physical Form
- Masterbatch
- Solid
Product families
Applications
- Food & Beverage Packaging
Product Families
- Additive Masterbatches
- Surface Modifiers
Other characteristics
- Carrier
Linear Low Density Polyethylene (LLDPE), Resin-based; Linear Low Density Polyethylene (LLDPE); Resin-based
- Functions
- Anti-Blocking Agent
- Processing Methods
- Extrusion, Film Extrusion
- Markets
- Printing & Packaging
- Technology
- Plastics
- Additives
- Silica (DE)
- Regulatory Data
FDA: The components in this product comply with the following sections of Title 21, Code of Federal Regulations (21CFR): 174.5 178.2010 177.1520 178.3297; 174.5 178.2010; 177.1520 178.3297; CONEG: The components of this product are compliant with the current requirements issued by the Coalition of North Eastern Governors (CONEG) requiring less than 100 PPM total in the final product packaging.
- HIGHLIGHTS
- Microscopically roughens film surfaces
- Prevents adhesion of films to one another
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- California Proposition 65
- Coalition of Northeastern Governors (CONEG)
- FDA 21 CFR 174.5
- FDA 21 CFR 177.1520
- FDA 21 CFR 178.2010
- FDA 21 CFR 178.3297
- Plastics and Elastomers End Uses
- Cast Films
- Film
- Plastics and Elastomers Functions
- Anti-Blocking Agent
- Plastics and Elastomers Processing Methods
- Extrusion
- Film Extrusion
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D792 |
| Melt Flow | 20 | g/10 min | ASTM D1238 |
| Type | LLDPE | — | — |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Additive Loading | 50 | % | Internal |
| Dispersion | Film Grade | — | Internal |
| Melt Flow | 5 | g/10 min | ASTM D1238 |
| Pellet Weight | 50 | Pellets/gm | Internal |
