Rainmaker Polymers ACLLUV10NA1
- CAS Number
- 70624-18-9
- EC Number
- 615-131-4
- Chemical Family
- Amines
Rainmaker Polymers ACLLUV10NA1 is UV PE Concentrate. Inhibitors will chemically react and disrupt the early stages of polymer degradation. These are very effective in thin articles such as film and sheet. Most common inhibitors are based upon hindered amine chemistry.
Properties
- Physical Form
- Masterbatch
- Solid
Identification
- Chemical Name
16-Hexanediamine NN'-Bis(2266-Tetramethyl-4-Piperidinyl)- polymer with 246-Trichloro-135-Triazine reaction products with 244-Trimethyl-2-Pentanamine
Product families
Applications
- Consumer Goods — Furniture
- Food & Beverage Packaging
Product Families
- Additive Masterbatches
- Antioxidants & Stabilizers
Other characteristics
- Carrier
Linear Low Density Polyethylene (LLDPE), Resin-based; Linear Low Density Polyethylene (LLDPE); Resin-based
- Features
Food Contact Acceptable, Good Thermal Stability, Good UV Resistance, Outdoor Durability
- Functions
- UV Resistant Agent
- Markets
- Consumer Goods
- Printing & Packaging
- Technology
- Plastics
- Additives
- UV Inhibitor
- Labeling Claims
- Food Contact Acceptable
- Regulatory Data
FDA: The components in this product comply with the following sections of Title 21, Code of Federal Regulations (21CFR): 174.5 178.2010 177.1520; 174.5; 178.2010; 177.1520; CONEG: The components of this product are compliant with the current requirements issued by the Coalition of North Eastern Governors (CONEG) requiring less than 100 PPM total in the final product packaging.
- Material Features
- Food Contact Acceptable
- Good Thermal Stability
- Good UV Resistance
- Outdoor Durability
- HIGHLIGHTS
- Stabilizes polymer against UV degradation
- High temperature stability
- Effective in thin sections
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- FDA 21 CFR 174.5
- FDA 21 CFR 177.1520
- FDA 21 CFR 178.2010
- FDA 21 CFR 178.3297
- Plastics and Elastomers End Uses
- Film
- Plastics and Elastomers Functions
- UV Resistant Agent
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D792 |
| Melt Flow | 20 | g/10 min | ASTM D1238 |
| Type | LLDPE | — | — |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Additive Loading | 10 | % | Internal |
| Melt Flow | 25 | g/10 min | ASTM D1238 |
| Pellet Weight | 60 | Pellets/gm | Internal |
