A+PLUS™ Hardwater Stain Remover
A+PLUS™ Hardwater Stain Remover™ contains a uniquely engineered abrasive that greatly speeds cleaning and restoration of most surfaces, including glass, metals, and porcelains. Removes and cleans mineral deposits, acid rain, cement leaching, silica, screen burn, soap scum, oxidation, scale, lime, corrosion, chalking, and rust. A+PLUS is the answer for glass restoration, both interior and exterior, and can safely be used on glass, ceramics, and metals. It contains no harmful chemicals and rinses away cleanly. It’s environmentally friendly and contains zero VOCs.
Properties
- Physical Form
- Liquid
Product families
Applications
- Surface Care
- Industrial Cleaning
Product Families
- Industrial Cleaners
Other characteristics
- Brand
- A+PLUS
- Features
- Stain Removing
- Product Type
Cleaner, Descalers, Rust Removers, Stain Removers; Cleaner; Descalers; Rust Removers; Stain Removers
- Compatible Substrates & Surfaces
- Ceramic, Glass, Metal
- Markets
- HI&I Care
- Availability
Available in Pints, Gallons, and 55-Gallon Drums.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Labeling Claims
Environmentally Friendly; Not Hazardous under OSHA Hazard Communication Standard; VOC-free
- Safety and Health
Be careful not to scratch glass. Change to a white scrubber pad to finish. Always dampen pad and use generous amounts of A+PLUS Hardwater Stain Remover. Work small areas. Wash area with water or window cleaning solution.. Test first. Especially on plastics, plastic laminates, or marble, where A+PLUS is okay to use, but the scrubbing or buffing process might leave scratches. Not recommended for use on optical coatings or lacquered brass. Protect vehicles and surrounding surfaces from splatter.
- Usage
Mineral Deposits; Acid Rain; Cement Leaching; Screen Burn; Silica; Soap Scum; Oxidation; Scale; Lime; Corrosion; Chalking; Rust; Use a scrub pad similar to a 3M white pad or a felt pad. Dampen pad with water then apply A+PLUS Hardwater Stain Remover. Work a small area until stains disappear. Can be wiped with a rag or paper towel, or washed with water or window cleaning solution.; Light Water Stain Damage; In a paint roller pan, mix 3 parts water to one part A+PLUS Hardwater Stain Remover. Apply with a white 3M scrubber. Rinse with water or window cleaning solution. Do not put the diluted product back into the original container.; Acid Rain, Mineral Deposits And Cement Leaching; An orbital sander set on 1,100-1,200 rpm may be used. For extremely hard stains start with a green pad.; Coverage; On glass, from 1,000 to 4,000 square feet per gallon, depending on job conditions and actual spotting coverage on each pane. You obtain better coverage with hand application using steel wool than with power equipment.
- Chemical Inventories
- TSCA (USA)
- Ready to Use Product Features
- Stain Removing
- Compatible Substrates and Surfaces
- Ceramic
- Glass
- Metal
