CompaDur® 121 GK 30 (009)

Name: CompaDur® 121 GK 30 (009)
Brand: CompaDur

CompaDur® 121 GK 30 (009) is a PBT, injection molding grade, 30% glass beads, heat stabilized, low warp, good surface.

Properties

Plastics — Engineering & Specialty Polymers

Brand: CompaDur
Polymer Name: Polybutylene Terephthalate (PBT)
Fillers Included: Glass Bead
Additives Included: Heat Stabilizer
Processing Methods: Injection Molding
Color: Natural
Markets: Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Applications: Automotive & Transportation — Other Automotive & Transportation Applications; Building & Construction — Other Building & Construction Applications; Consumer Goods — Other Consumer Goods Applications; Electrical & Electronics — Other Electrical & Electronics Applications
Flame Rating: UL 94 HB
Technology: Plastics
Material Features: Good Surface Finish
Heat Stabilized
Low Warpage
Processing Guidelines: Predrying. The moisture of CompaDur must not exceed 0,02% in order to avoid the degradation of the polymer during processing. Therefore we strongly recommend to pre-dry the product, preferably by air dryer (dry air). The product should be dried over 2 to 4 hours at 120 - 140 ° C.
Certifications and Compliance: UL 94
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

6 rows

Characteristic	Value	Unit	Method
Density (23°C)	1.54	g/m³	ISO 1183
Melt Volume Flow Rate (250/2,16)	14	cm³/10 min	ISO 1133
Tensile Modulus (1mm/min)	4200	mPa	ISO 527
Stress at Break (5 mm/min)	50	mPa	ISO 527
Strain at Break (5 mm/min)	3	%	ISO 527
Flammability (0,8 mm)	HB	Class	UL 94

11 rows