Polo Films TSY.IJM 17TSYIJM
TSY.IJM 17TSYIJM has optimum performance in horizontal and vertical form-fill-seal packing machines and used in Flexible packaging for food like pastas, cookies, snacks, chocolate bars, cereal bars and packaging for printed grouping.
Properties
- Physical Form
- Film
Product families
- Food & Beverage Packaging
- Industrial & Transport Packaging
- Other Packaging Materials
Other characteristics
- Features
- Good Optical Properties, Heat Sealable
- Polymer Name
- BOPP (Polypropylene) Film
- Markets
- Printing & Packaging
- Storage
All products are stored and transported in dry, covered and clean environments. It is recommended that storage and transportation take place at temperature around 30°C and 60% relative humidity. If the temperature and humidity are not as recommended, the following issues may occur:; Decreased level of surface treatment, leading to printing and/or lamination difficulties; Decreased film transparency; Too low CoF, making processing and machinability difficult.; BOPP films are recommended to be kept at operating room temperature for 24 hours before use.
- Shelf LIfe
- 6 months
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Good Optical Properties
- Heat Sealable
- Chemical Inventories
- Anvisa Compliant (Brazil)
- Main Characteristics
Both sides heat-sealable, non-treated side from 105°C; Surface treatment on inner or outer layer; Untreated face appropriate for Ink Jet Mark printing; Optimum optical properties (gloss and transparency); Transparent BOPP film; Heat- sealable; Surface treatment for printing and/or lamination; Appropriate for Ink Jet Mark printing
- Typical Applications
Non-food flexible packaging: monolayers or laminate; Continuous labels (WAL Roll Fed), monolayers or laminate; Developed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.
- Food Contact Regulations
SEAL Family films comply with Mercosul, ANVISA, FDA (Food and Drug Administration) and the European Community legislations for applications involving direct contact with food. Full details are provided in the Declaration of Conformity. Customers intending to use SEAL Family films for applications intended to come into contact with food should request a copy of that document from POLO Films
- Dimensional Specifications
- Minimum
- 0 mm | Maximum: 2 mm (from standard width)
- Minimum
- 30 mm | Maximum: 20 mm (from standard diameter)
- Minimum
- 1 mm | Maximum: 1 mm (from standard diameter)
- Certifications and Compliance
- FDA Compliant
- Plastics and Elastomers End Uses
- Film
- Flexible Packaging
- Food Packaging
- Form Fill Seal Packaging
Technical data
Table 1 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (MD) | 140.0 | N/mm² | ASTM D 882 |
| Tensile Strength (TD) | 240.0 | N/mm² | ASTM D 882 |
| Elongation at Break (MD) | 180.0 | % | ASTM D 882 |
| Elongation at Break (TD) | 40.0 | % | ASTM D 882 |
| Shrinkage (MD) | 3.0 | % | ASTM D 1204 |
| Shrinkage (TD) | 1.0 | % | ASTM D 1204 |
| Sealing Range (Non Treated Layer) | 105 - 130 | °C | ASTM F 88 |
| Sealing Strength (Non Treated Layer) | min. 300 | gf/in | ASTM F 88 |
Table 2 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Nominal Thickness | 16.2 - 17.9 | µm | DIN 53370 |
| Yield | 61.9 - 68.4 | m²/kg | ASTM D 4321 |
| Unit Weight | 14.6 - 16.2 | g/m² | ASTM D 4321 |
| Surface Treatment (Treated Layer) | min. 38 | — | — |
| Coefficient of Friction (Non Treated Layer) | 0.20 - 0.30 | — | — |
Table 3 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Gloss (45°) | min. 90 | % | ASTM D 1003 |
| Haze | max. 3 | u.b | ASTM D 2457 |
Table 4 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| TPVA (38°C / 90%UR) | max. 8.5 | g H2O / (m².dia) | ASTM F 1249 |
| WVTR (100°F / 90%RH) | max. 0.55 | gH2O/(100in².day) | ASTM F 1249 |
| TPO2 (23°C / 0%UR) | max. 3200 | cm³ O2 / (m².dia) | ASTM D 3985 |
| OTR (73°F / 0%RH) | max. 206 | cm³O2 / (100in².day) | ASTM D 3985 |
