To catalogue
Return Polymers RP2000
- Chemical Family
- Vinyls Vinylics & Vinyl Derivatives
Return Polymers RP2000 is 100% recycled PVC pulverized into a 20 mesh powder and blended in large quantities to ensure consistency. Primarily used in fence, window, conduit and siding applications with or without a capstock layer and processed by single and or twin screw extrusion.
Properties
- Physical Form
- Pellets
- Powder
- Solid
Product families
Applications
Agriculture & Feed — Agricultural Films
- Pipes & Hoses
Building & Construction — Building Materials
- Fence Decks & Rails
- Interior Fixtures
- Pipes & Plumbing
- Siding & Trim
Product Families
Plastics — Basic Thermoplastics
- Recycled Polymers
Other characteristics
- Polymer Name
- Polyvinyl Chloride (PVC)
- Labeling Claims
- Contains PIR Resin, Recycled
- Contains PIR Resin
- Recycled
- Processing Methods
- Extrusion
- Color
- Custom
- Grey
- Markets
- Agriculture & Feed
- Building & Construction
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Material Features
- Good Impact Strength
- Good Surface Finish
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Cup Holders
- Pipes
- Siding Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Sieve Analysis (Retention on 20 mesh) | 3.0 | % | — |
| Sieve Analysis (Retention on 120 mesh) | 97.0 | % | — |
| Specific Gravity | 1.44 | — | ASTM D-792 |
| Bulk Density | 30.0 | lbs/ft3 | ASTM D1895 |
| Tensile Strength (Type I [3mm, 2 in/min]) | 7172.0 | lbs/in2 | ASTM D 1990 |
| Tensile Impact (Type S [3mm]) | 80.0 | ft-lb/in2 | ASTM D1822 |
| Drop Impact Resistance (70 F, 8# wt, ½” conical tup. Maximum value on a 2" strip recorded) | 3.5 | lbs/mil | ASTM D4226 |
| Heat Deflection Temperature | 160.0 | °F | ASTM D 648-85, under load |
| Flame Rating (3mm) | V-0 & HB | — | UL 94 |
| Hot Wire Ignition (PLC) | max. 1 | — | ASTM D3874 |
