JOKISCH MONOS ATOS A2G
JOKISCH MONOS ATOS A2G is a the range of application covers all non-ferrous metals: e.g. Aluminum casting, die casting, cast- and redbrass, bronze, aluminum, copper, zinc and its alloys, etc. For thread cutting, thread chasing, tapping, centering, reaming, drilling and milling, as well as for chipless machining. Also suitable for sawing. The range of application covers all non-ferrous metals: e.g. Aluminum casting, die casting, cast- and redbrass, bronze, aluminum, copper, zinc and its alloys, etc. For thread cutting, thread chasing, tapping, centering, reaming, drilling and milling, as well as for chipless machining. Also suitable for sawing.
Product families
Applications
- Equipment & Parts
Product Families
- Lubricants & Oils
- Metalworking Fluids
Other characteristics
- Brand
- JOKISCH MONOS ATOS
- Product Type
- Drawing Oils, Metalworking Fluids
- Drawing Oils
- Metalworking Fluids
- Application Area
Drilling Applications, Microlubrication, Milling Operations, Reaming, Sawing Operations, Tapping Operations, Threading Operations; Drilling Applications; Microlubrication; Milling Operations; Reaming; Sawing Operations; Tapping Operations; Threading Operations
- Compatible Substrates & Surfaces
- Aluminum, Brass, Copper, Iron, Metal, Steel
- Markets
- Industrial
- Material
- Limited suitable
- PACKAGING
- Carton with 10 x 250ml Bottle
- 5 Liter PE Canister
- 10 Liter PE Canister
- 25 Liter PE Canister
- 60 Liter Drum
- 209 Liter Drum
- Carton with 12 x 300ml Spray tins
- Technology
- Ready-to-Use Products
- Packaging Type
- Bottles
- Cans
- Drums
- Characteristic
High-quality cutting and drawing oil with a special combination of high-pressure additives. Operates extremely economically with minimal tool wear. Extremely long service life and optimum material quality are the result. Low viscosity, therefore very good cooling effect, can be used in pumping systems and suitable for minimum quantity lubrication.
- Compatible Substrates and Surfaces
- Aluminum
- Brass
- Copper
- Iron
- Metal
- Steel
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flashpoint (PM) | min. 180 | °C | DIN EN 57 |
| Kinematic viscosity (40°C) | 87.0 | mm²/s | ASTM D 7042 |
| Density (20ºC) | 0.9 | g/cm3 | DIN ISO 12185 |
