Dalian Bio-Chem CMIT/MIT -1.5F
- CASE Ingredients Features
- Good CompatibilityLow Toxicity
Dalian Bio-Chem CMIT/MIT -1.5F is suitable for wet corrosion of the aqueous products, can be used to protect the paint, polymer emulsions, adhesives, enamels, fillers, sealants and other water based products against harmful microbiological contamination, it can also be used diluted metal cutting fluid additive.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Anti-Microbial AgentBactericideBiocide
Product families
Applications
- Adhesives & Sealants — Other Adhesives & Sealants Applications; Paints & Coatings — Other Paints & Coatings Applications; Printing & Packaging — Other Printing & Packaging Applications
- Fluids & Lubricants
Product Families
- Microbial Control & Preservation
- Lubricant Protective Additives
Other characteristics
- Functions
Anti-Microbial Agent, Bactericide, Biocide, Microbial Control
- Labeling Claims
- Formaldehyde-free, VOC-free
- Formaldehyde-free
- VOC-free
- Markets
- Adhesives & Sealants
- Industrial
- Paints & Coatings
- Printing & Packaging
- PACKAGING
1. 000 kg per IBC drum or 200 kg per drum, or 25 kg per drum.
- Appearance
- Light blue or blue-green transparent liquid
- Coating Type
- Enamel
- Waterborne Coating
- Technology
- CASE Ingredients
- Fluids & Lubricants
- Packaging Type
- Drums
- Totes (IBC)
- Usage and Cautions
In the water treatment applications, apply the solution at a quantity of 50 to 100 ppm for one or two times each week depending on the multiplication of microorganisms like bacteria and algae. The concentration of using in paints or coatings is 0.05 ~ 0.4%.; Avoid direct eyes' contact with it for a long period. Once the contact happens, rinse eyes with water without delay. No long-term contact with the skin is allowed.; Any contact with reducible metals is forbidden during storage, for example, iron and aluminum, so as to avoid decomposition.; Not suitable for use in the alkaline medium of pH> 9.0 due to its poor stability. Any combination of this chemical with highly nucleophilic chemicals, like S2- and R-NH2, will lead to declined quality or even complete failure of the product.
- Adhesive & Sealant Type
- Waterborne Adhesive
- Waterborne Sealant
- Fluids and Lubricants Type
- Metalworking Fluids
- Storage and Transportation
To be stored at room temperature in a dark place; with a shelf time of one year
- Fluids and Lubricants End Use
- Cutting Oils
- Water-Miscible Cutting Fluids
- Performance Characteristics
As a broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the using amount is small.; Suitable for use in the medium of the pH value in the range of 2 to 9; free of divalent salt, cross-link no emulsion.; Miscible with water; can be added in any production step; easy to use.; It has a low toxicity and an appropriate concentration of using, which will lead to no harm completely.; Cause no residue after discharge, and no accumulation of pollution to environment.; It is not combustible and easy to transport and use.; Good compatibility with all kinds of emulsifiers, surfactants and protein-contained agents.; It has an excellent, worldwide-recognized effect on pseudomonas.; Contain no formaldehyde and VOC.
- Fluids and Lubricants Functions
- Biocide
- Microbial Control
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Content of Active Substance | 1.50~1.80 | % |
| pH Value | 2.0~5.0 | — |
| Density | 1.02~1.05 | g/ml |
