Policril® Standard 1290

Chemical Family: Methacrylates

Policril® Standard 1290 is characterized by excellent optical clarity, stable & tough, lightweight and policril sheet lends itself to a variety of fabrication and molding techniques and can be cut and drilled using a conventional range of tools.

Properties

Physical Form: Sheets

Product families

Automotive & Transportation — Automotive

Exterior & Body

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures

Electrical & Electronics — Devices & Assemblies

Displays
Lighting

Other characteristics

Brand: Policril
Features: Chemical Resistant, Good Stability, Good Toughness, Improved Optical Clarity, Light Weight, Low Water Absorption, Recyclable, UV Resistant
Polymer Name: Polymethyl Methacrylate (PMMA)
Markets: Automotive & Transportation
Building & Construction
Electrical & Electronics
Technology: Plastics
Characteristic: Thickness range from 2mm to 80mm
Wide range of colors and tints
U.V resistant
High chemical resistance
Low water absorbsion
Fully recyclable
Product Families: Plastics — Parts, Shapes & Films
Material Features: Chemical Resistant
Good Stability
Good Toughness
Improved Optical Clarity
Light Weight
Low Water Absorption
Recyclable
UV Resistant
Certifications and Compliance: ISO 14001
ISO 9001
Plastics and Elastomers End Uses: Displays
Glazing
Lighting Applications
Signage

Technical data

Table 1 of 6

8 rows

Characteristic	Value	Unit	Method
Tensile Strength	min. 70	Mpa	UNE-EN ISO 527-2/1B/5
Modulus of Elasticity in Traction	min. 3000	Mpa	UNE-EN ISO 527-2/1B/5
Deformation in Traction	min. 4	%	UNE-EN ISO 527-2/1B/5
Flexural Strength	110.0	Mpa	UNE-EN ISO 178
Resistance to Charpy Impact (Test Piece Not Notched)	min. 13	kJ/m2	ISO 179/1 Fu
Rockwell Hardness	100.0	Escala M	UNE-EN ISO 2039-2
Friction Coefficient (PMMA / PMMA)	0.8	ºC	IRPEN
Friction Coefficient (PMMA / Steel)	0,48 - 0,55	ºC	IRPEN

Table 2 of 6

6 rows

Characteristic	Value	Unit	Method
Density	1.19	g/cm3	ISO 1182, Method A,C o D
Water Absorption (24h, 23ºC)	0,50^(2)	%	UNE-EN ISO 62, Method 1
Calorific Power (760Mm and 0°C)	1.255	kJ/Kg, ºC	—
Lgnition Temperature Ti	300.0	ºC	ASTM-1929
Self-Ignition Temperature TAI	430.0	ºC	ASTM-1929
Reaction To Fire By Radiation	M4	—	UNE-23-727

Table 3 of 6

10 rows

Characteristic	Value	Unit	Method
Specific Heat	0.35	cal/g, ºC	—
Heat Conductivity	4,5 x 10^-4	cal cm/cm^2 seg, ºC	DIN52612
Heat Transmission Coefficient (3mm)	5.5	kcal/m^2 h, ºC	—
Softening Temperature Vicat	118.0	ºC	UNE-EN ISO 306 Method A50
Temperature For Buckling Under Load	98.0	ºC	UNE-EN ISO 75/2-A
Recommended Moulding Temperature	150 - 170	ºC	—
Maximum Service Temperature	80 - 85	ºC	IRPEN
Moulded Part	75 - 80	—	—
Linear Dilation Coefficient	7 x 10^-5	K^-1	ISO 11359-2
Dimensional Variations At High Temperature (Contraction)	max. 2,5	%	UNE-EN ISO 7823-1 Schedule A

Table 4 of 6