Crestaform® Rapid 2.0 3D printing resin
Crestaform® Rapid 2.0 3D printing resin is an upgraded general-purpose resin formulation that offers a lightning-fast print speed, high print quality, enhanced color, robust mechanical performance, and increased usability. It is specifically designed for creating high-resolution models, figurines, rapid prototyping, and jewelry.
Product families
Applications
- Tooling & Moldmaking
Product Families
- Photoactive Resins
Other characteristics
- Brand
- Crestaform
- Density
- 1,050.0 - 1,070.0 kg/m³
- End Uses
Figurines, Jewelry, Modeling Material, Prototyping
- Tensile Strength
- 46.0 MPa
- Processing Methods
Digital Light Processing, Masked Stereolithography (LCD)
- Note
Mechanical Testing Specimen Print Orientation - 50°; * 16 mins at 60°C + 405nm UV Post Cure for cured properties
- Markets
- Industrial
- Technology
- Plastics
- Compatibility
Crestaform® Rapid 2.0 has been designed to work with any UV LCD and DLP 3D printer that is open to 3rd party resins, including, but not limited to:; Anycubic; Elegoo; Phrozen; Creality; Asiga
- Color
- Grey
- Transparent
- White
- Material Features
- Excellent Color
- Fast Printing
- General Purpose
- Good Mechanical Properties
- High Print Quality
- Storage Condition
Crestaform® Rapid 2.0 should be stored in the dark, in suitable, closed containers. It is recommended that the storage temperature should be between 15°C and 35°C. Ideally, containers should be opened only immediately prior to use. Keep out direct light/sunlight.
- Recommended Cleaning
Soak the print in a clean isopropanol (IPA) (or similar solvent) bath for a minimum of 2 minutes. Alternatively, rinse the part with IPA until all the visible uncured resin has been removed. Reusing IPA in multiple cleans can reduce the cleanliness and clarity of a print. Leave the print to dry off any residual solvent prior to post-curing
- Packaging Information
Crestaform® Rapid 2.0 is supplied in 1000 g bottles. Bulk supply available.
- Recommended Post-Curing
Post-cure as soon as possible after completion of printing; Post-cure every print for a minimum of 10 minutes under a dedicated curing UV light operating at 405nm wavelength. Alternatively, leave the print to cure for a minimum of 2 hours under direct sunlight; Temperature-assisted UV curing will increase the rigidity of the print
- Typical Printing Parameters
* For DLP printers, it is recommended that light power is reduced to around 2.5mW/cm2
- Plastics and Elastomers End Uses
- Figurines
- Jewelry
- Modeling Material
- Prototyping
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Digital Light Processing
- Masked Stereolithography (LCD)
- Benefits
- Excellent mechanical performance
- High reactivity and printing speed
- Rigorously tested to ensure optimal performance
- Instructions to Use the Resin
Always shake or mix the resin thoroughly before use; Open the container and pour the appropriate amount of resin into the tank according to the size of the printer model; Make sure to not spill the resin onto the printer, LCD screen or anywhere outside of the resin tank; If not used for a long time, please filter the resin and pour the resin into the storage container
Technical data
Table 1 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| ICI Viscosity (at 25°C) | 1.8 - 2.5 | Poise |
| Liquid Density | 1.05 - 1.07 | g/cm³ |
Table 2 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength* | 46.0 | MPa | ISO 527-2 Type 5A |
| Tensile Modulus* | 1.9 | GPa | ISO 527-2 Type 5A |
| Elongation (at break)* | 4.0 | % | ISO 527-2 Type 5A |
| Flexural Strength* | 75.0 | MPa | ISO 178 |
| Flexural Modulus* | 1.7 | GPa | ISO 178 |
| Hardness* | 82.0 | Shore D | ISO 868 |
| Heat Deflection Temperature (1.8 MPa)* | 50.0 | °C | ISO 75-2, Method A |
