Magnalube® G
Magnalube®-G is a non-soap polyurea lubricating grease formulated with the highest quality raw materials. Magnalube®-G has a unique formula that blends PTFE and polyurea for superior performance. The grease will prevent breakdowns, and extend operating intervals in most cases. It is fortified with a number of proprietary additives that inhibit rust and oxidation as well as giving added resistance to extreme pressure. Magnalube®-G has a dropping point of well over 500°F. It performs well in harsh environments, especially when users want to avoid migration and water washout. This is a superb all-purpose grease, and is often found to solve problems that other greases cannot.
Product families
- Greases
Other characteristics
- Brand
- Magnalube
- Features
Consistent Performance, Electrically Insulating, Excellent Lubricity, Excellent Mechanical Strength, Excellent Mold Release, Good Thermal Stability, High Dielectric Strength, High Temperature Strength, Long Shelf Life, Water Resistant, Wide Temperature Operating Range
- Product Type
- Grease
- Thickener Type
- Polytetrafluoroethylene (PTFE), Polyurea
- Polyurea
- Application Area
Bearings, Electric Motors, Gears, Hydraulic Pumps, Mining Operations, Truck Trailer, Vacuum Pumps, Valves; Bearings; Electric Motors; Gears; Hydraulic Pumps; Mining Operations; Truck Trailer; Vacuum Pumps; Valves
- Markets
- Automotive & Transportation
- Building & Construction
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Texture
- Smooth
- NLGI Grade
- NLGI 2
- Technology
- Ready-to-Use Products
- Base Oil
- Paraffin
- Labeling Claims
- Non-Corrosive
Technical data
Table 1 of 1
21 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Boiling Water Immersion (10 minutes) | Excellent, No Disintegration | — | FTM-3463 |
| Corrosion Prevention | Pass | — | ASTM D 1743 |
| Dropping Point | min. 500 | °F | ASTM D 2265 |
| Evaporation (22hrs, 350°F) | 0.029 | — | ASTM D:566 |
| Food Contact Rating | H2 = No Contact | — | — |
| Four Ball EP Weld Point | min. 250 | kgf | ASTM D 2596 |
| Four Ball Wear Scar Diameter | 0.36 | mm | ASTM D 2266 |
| High Temperature Performance (450°F, 500 hours) | 10000.0 | rpm | — |
| Oxidation Stability (100 hrs, 210°F) | max. 10 | — | ASTM D 942 |
| Pour Point | 10.0 | °F | — |
| Roll Stability Change | max. 2 | % | ASTM D 1831 |
| Rust Preventative Properties | Excellent | — | ASTM D 1743 |
