GBneuhaus GBhydrophilic - Anti-fog coating
GBneuhaus GBhydrophilic - Anti-fog coating is a transparent hydrophilic functional layer achieves an improved wetting behavior of the surface so that fine precipitating water droplets spread to form a cohesive thin film. This creates an anti-fog effect and prevents optical interference. The thin film of water also facilitates evaporation and makes for a cooling effect (greater energy-saving potential).
Properties
- Properties of GBhydrophilic
No change in optical quality of substrate; Abrasive hardness (cross-cut test according to DIN EN ISO 2409); Chemical-proof to customary detergents and disinfection methods; Transparent; Mechanically flexible
Product families
- Protective Coatings
Other characteristics
- Features
Abrasion Resistant, Anti-Fogging, Chemical Resistant, Excellent Wetting Behaviour, Good Scratch Resistance, Highly Flexible
- Product Type
- Coating
- Application Area
- Safety Goggles
- Application Method
- Dip Coating, Spray
- Compatible Substrates & Surfaces
Acrylonitrile Butadiene Styrene (ABS), Glass, Plastics, Poly(Methyl Methacrylate) (PMMA), Polyamide
- Coating
Certified according to REACH and RoHS; Certified according to ISO 9001:2015; processes comply with IATF 16949; Environmental management conforms to ISO 14001
- Markets
- Paints & Coatings
- Substrates
- Plastics (PC, ETFE and more)
- Technology
Dip coating or spraying; Application process is defined individually according to geometry and requirements of the substrate.; Ready-to-Use Products
- Applications
Paints & Coatings — Other Paints & Coatings Applications; Safety Goggles; Coverings; Glasses; Panes; Mirrors; Touchscreens; And Many More
- Application Methods
- Dip Coating
- Spray
- Certifications and Compliance
- REACH (Europe)
- RoHS Compliant
- Ready to Use Product Features
- Abrasion Resistant
- Anti-Fogging
- Chemical Resistant
- Excellent Wetting Behaviour
- Good Scratch Resistance
- Highly Flexible
- Compatible Substrates and Surfaces
- Acrylonitrile Butadiene Styrene (ABS)
- Glass
- Plastics
- Poly(Methyl Methacrylate) (PMMA)
- Polyamide
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Contact Angle for Water (θ) | min. 5 | ° | DIN 55660-3:2011-12 |
| Film Thickness | 5 -10 | µm | — |
| Maximum Temperature Load | 200.0 | °C | — |
| Pencil Hardness | max. 10 | H | ISO 15184 |
| Scratch Hardness | max. 20 | N | DIN EN ISO 1518 |
