Interflon Degreaser EM56+
Interflon Degreaser EM56+ is a high yielding, heavy duty industrial degreaser. Powerful, slow evaporating industrial degreaser with F-Active Technology. Very suitable for cleaning and degreasing machines, parts and surfaces that are heavily soiled with dried oil and grease residues. Rapidly breaks down grease, oil and other hydrocarbons. Leaves behind a protective layer that protects against rust.
Properties
- Physical Form
- Liquid
Product families
Applications
- Auto Care
- Surface Care
- Food Facility Cleaning & Sanitization
- Vehicle & Machinery
- Food & Beverage Manufacturing
Product Families
- Commercial Cleaners
Other characteristics
- Features
- Degreasing
- Product Type
Adhesive Remover, Degreasers, Graffiti Remover, Paint Remover, Tar Cleaner; Adhesive Remover; Degreasers; Graffiti Remover; Paint Remover; Tar Cleaner
- Application Area
Bearings, Conveyor Chains, Engine, Equipment, Floor, Machine Parts, Slides, Wall; Bearings; Conveyor Chains; Engine; Equipment; Floor; Machine Parts; Slides; Wall
- Compatible Substrates & Surfaces
- Concrete, Stone
- Odor
- Characteristic
- Markets
- Food & Nutrition
- HI&I Care
- Storage
Storage temperatures should be less than 0°C need to be avoided to guarantee product quality.
- Advantages
- Excellent degreasing and cleaning effect
- Protective film against corrosion
- Can be rinsed with water
- Short emulsion time in oil-water separators
- Slow evaporation rate
- Shelf LIfe
- 2 years
- Composition
- Mixture of solvents and additives
- Technology
- Ready-to-Use Products
- Certifications
- Halal,Kosher
- Packaging Type
- Jerrycan
- Application Methods
- Brush
- Spray
- Use instructions
Do not dilute the product. Interflon Degreaser EM56+ can be applied manually (i.e. brush) as well as by plunging or spraying. The best result is obtained by first applying the cleaner for 10 to 20 minutes and then brush or wipe off. If required, rinse the surface with water. Does not affect lacquer and synthetic material. Also NBR and neoprene rubbers are not affected. Can be sprayed using a trigger spray. The trigger spray will perish in time.. It is advisable to test a small inconspicuous area to make sure that the cleaning agent does not adversely affect or damage the surface being cleaned. Do not apply to hot surfaces. When cleaning large vertical areas, apply the product from the bottom and work upwards ensuring that the whole area is covered. Cleaning away any dirt is best done from the top in a downwards direction to prevent leaving any streak marks. Do not use the product or allow to dry in direct sunlight.
- Ready to Use Product Features
- Degreasing
- Compatible Substrates and Surfaces
- Concrete
- Stone
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (20°C) | 0.76 | g/cm³ |
| Highest Application Temperature | 40.0 | °C |
| Evaporation Speed (n-BuAc= 1) | 0.06 | — |
| Vapour Pressure (20°C) | 0.6 | hPa |
