Gasocut Foam 192
- CASE Ingredients Features
- Sustainable
- Chemical Family
- Non-Ionics
Gasocut Foam 192 is composed of modified mineral oil, polyether, special silicone oil, emulsifier and other ingredients Composed of defoamer, it has long-term sustained defoaming ability, specially designed for high pvc and medium to high viscosity Waterborne paint body design.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Defoamer
Product families
Applications
- Exterior & Body
- Body Shop & Repair
Product Families
- Foam Control
Other characteristics
- Brand
- Gasocut
- End Uses
- Latex, Waterborne Coating
- Functions
- Defoamer
- Compatible Polymers & Resins
- Latex, Styrene Butadiene Latex
- Safety
Precautions After freezing at low temperature, it should be slowly thawed at room temperature and thoroughly stirred before use. The delamination of this product during storage is a common phenomenon of defoamer. Before use, it must be Need to stir evenly. Safe and Environmentally Friendly Avoid contact with eyes, skin, mucous membranes and exposed wounds, in case of accidental contact, please Wash with plenty of water.
- Markets
- Automotive & Transportation
- Packing
- BagPack Barreled 30kg, 160kg
- Storage
Store in a dry place, the package is not opened, the temperature is 5-30 ℃, the storage period is 12 months.
- Used In
GASOCUT Foam 192 is used in water-based latex paints and shows superior long-term sustainability Defoaming capacity.; GASOCUT Foam 192 is very effective for roller defoaming.; GASOCUT Foam 192 is suitable for plain coatings with a larger pigment content than usual.; GASOCUT Foam 192 has good foam suppression properties.; GASOCUT Foam 192 has good paint blending properties and defoaming properties not found in general defoamers Yes.; Flat light; Semi-light coating; Water-based indoor and outdoor coating; Waterborne epoxy resin; Water-based alkyd resin.
- Appearance
- Yellow Cloudy Liquid
- Coating Type
- Latex
- Waterborne Coating
- Instructions
The normal dosage of GASOCUT Foam 192 is 0.1-0.3% of the paint weight. To use GASOCUT Foam 192 well, it is best to divide it into several steps, for example, first Add 1/2 of the amount to the paint, and then grind it to prevent the formation of air bubbles, and then put the remaining. The amount is added during the letdown process.
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Application Methods
- Roll Coater
- Compatible Polymers and Resins
- Latex
- Styrene Butadiene Latex
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Weight (25°C) | 0.86 | g/ml |
| Viscosity | 300 - 1800 | mPa·S |
| Ionicity | Nonionic | — |
| Flash Point | 169.0 | — |
