To catalogue
KPC® KLC-35G
- Chemical Family
- Vinyls Vinylics & Vinyl Derivatives
KPC® KLC-35G by Kadakia Plastics and Chemicals is a general purpose, flexible polyvinyl chloride (PVC) grade. Is suitable for processing by profile extrusion. Possible applications could be AV, AVS, AVSS wiring harness, sleeves, door trims, fuel tubes, horn pads, knobs, weatherstrips, roof garnish, quarter glass profiles and profile end molding in automotive industry. KPC® KLC-35G complies with IS, JIS, JASO, SAEJ and Underwriters Laboratory (UL).
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
- Aftermarket Parts & Components
- Electrical & Electronic Systems
- Exterior & Body
- Fuel Systems
- Interior
Building & Construction — Building Materials
- Structural Components
Electrical & Electronics — Wire & Cable
- Jacketing & Insulation
- Other Wire & Cable Applications
Product Families
Plastics — Basic Thermoplastics
- Vinyl Polymers
Other characteristics
- Brand
- KPC
- End Uses
Automotive Applications, Automotive Components, Automotive Electronics, Automotive Exterior Parts, Automotive Exterior Trim, Automotive Fuel Lines, Automotive Interior Parts, Cables, Knobs, Wire Jacketing, Wires
- Polymer Name
- Polyvinyl Chloride (PVC)
- Processing Methods
- Extrusion, Profile Extrusion
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Key Features
- General purpose
- Technology
- Plastics
- Material Features
- General Purpose
- UL Listed
- HIGHLIGHTS
Product Type - PVC (Polyvinylchloride) > PVC, Flexible; Product Status - COMMERCIAL
- Agency Ratings
- IS JIS JASO SAEJ Underwriters Laboratory (UL)
- Applications
- Automotive Extrusion > Profiles
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Components
- Automotive Electronics
- Automotive Exterior Parts
- Automotive Exterior Trim
- Automotive Fuel Lines
- Automotive Interior Parts
- Cables
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Profile Extrusion
Technical data
Table 1 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hardness | 70 | Shore A | A DIN 5305 |
| Tensile Strength | 150 | kg/cm2 | IS: 10810 |
| Tensile Elongation | 35 | % | IS: 10810 |
Table 2 of 4
1 row| Characteristic | Value | Method |
|---|---|---|
| Specific Gravity | 1.38 | ASTM D792 |
Table 3 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Thermal Stability ( 200°C) | 45 | Minutes |
Table 4 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Processing Temperature | 135 - 165 | °C |
