To catalogue
Nilamid® B3 CU90
- Chemical Family
- Polyamides
Nilit NILAMID® B3 CU90 is a Polyamide 6 (Nylon 6) compound, 90% copper filled.This compound is intended for injection molding.NILAMID® B3 CU90 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.
Product families
Applications
Applications
- Consumer Goods — Housewares; Consumer Goods — Other Consumer Goods Applications; Electrical & Electronics — Other Electrical & Electronics Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Other Automotive Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
- Other Devices & Assemblies
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Nilamid
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Copper
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Country Availability
- Brazil
- Canada
- China (Mainland)
- Mexico
- USA
- Plastics and Elastomers End Uses
- Automotive Applications
- Consumer Applications
- Electrical/Electronic Applications
- Industrial Applications
- Kitchenware
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 1500 | MPa | ISO 527 |
| Yield stress | 18 | MPa | ISO 527 |
| Strain at break | 22 | % | ISO 527 |
| Charpy notched impact strength (+23°) | 4 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength (-30°) | 3 | kJ/m2 | ISO 179/1eA |
| Charpy impact strength (-30°) | 20 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength (+23°) | 26 | kJ/m2 | ISO 179/1eU |
Table 2 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 5200 | kg/m3 | ISO 1183 |
Table 3 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Temperature of deflection under load (1.80 Mpa) | 220 | °C | ISO 75-1/-2 |
| Temperature of deflection under load (0.45 Mpa) | 225 | °C | ISO 75-1/-2 |
Table 4 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water absorption | 2.5 | % | Sim. to ISO 62 |
