DayGlo Corona Magenta (SPL-21J)
- CASE Ingredients Features
- Excellent StabilityLight Fastness
The DayGlo SPL-J Series Dispersions contain approximately 58% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-J Series Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Colorant
Product families
Applications
- Paints & Coatings — Other Paints & Coatings Applications
- Flexography
- Gravure Printing
Product Families
- Photoluminescent Pigments
- Color Dispersions
- Dispersions & Masterbatches
Other characteristics
- Color
- Magenta (Fluorescent)
- Carrier
- Water
- End Uses
Flexography Ink, Gravure Ink, Waterborne Coating, Waterborne Ink
- Pigment Type
- Fluorescent
- Markets
- Paints & Coatings
- Printing & Packaging
- Handling
SPL-J Series Dispersions are liquid products, which offer easy incorporation into aqueous systems with minimal mixing. These products are not compatible with nonaqueous formulations.; The SPL-J Series Dispersions should be mixed before use to ensure homogeneity. The pH of the SPL-J Series should be adjusted to a minimum of 8.0 before use with other ingredients to avoid shocking the ink or coating system.; These products are for industrial use only. Avoid contact with skin and eyes. Do not swallow. Use appropriate respirator if the product forms mists.
- Coating Type
- Waterborne Coating
- Technology
- CASE Ingredients
- Pigments & Colorants
- Lightfastness
SPL-J Series Dispersions exhibit good lightfastness for indoor applications. However, their exterior lightfastness is limited. The users should conduct their own tests to determine if the use of SPL-J Series Dispersions will meet their lightfastness requirements.
- Packaging Type
- Pails
- Labeling Claims
- Formaldehyde-free
- Ink and Toner Type
- Flexography Ink
- Gravure Ink
- Waterborne Ink
- Viscosity Control
Formulations based on SPL-J Series Dispersions are designed to be thinned with water only. Formulations may tolerate small quantities of alcohols but levels should be kept below 5%. Testing should be conducted when solvents are used to determine their affects on the final application formulas. Viscosity can be increased with the use of Joncryl 142 or a similar product. The addition of 5% of Joncryl 142 will increase viscosity approximately 20 seconds/#2 Zahn cup. Testing should be conduct with each thickener to determine their affects on the final application formulas.
- Compatible Substrates and Surfaces
- Paper
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Brookfield Viscosity (25ºC,RVT #1, 20 RPM) | 150 - 450 | cPs |
| Hegman Grind | min. 5 | — |
| Percent Solid | 57 - 63 | % |
| Specific Gravity | 1.05 - 1.15 | — |
| pH Value | 8.0 - 8.8 | — |
