CPIC North America ER469HT-8800
- Chemical Family
- Glass Beads & Fibers
CPIC North America ER469HT-8800 is used in pultrusion applications in polyester resin systems or vinyl resin systems. The direct rovings can be used to manufacture large fiberglass reinforced profiles with this big TEX rovings.
Properties
- Physical Form
- Fiber
Product families
Applications
- Glazing & Window Elements
- Waterproofing & Weatherproofing
- Interior Fixtures
- Wall Panels
Product Families
- Glass Fiber
Other characteristics
- Features
- Good Wetting Properties
- Processing Methods
- Pultrusion
- Reinforcement Form
- Roving
- Reinforcement Material
- Glass Fibers
- Compatible Polymers & Resins
- Polyesters, Vinyl Esters
- Markets
- Building & Construction
- Storage
The rovings should be stored away from heat and moisture, and in their original packaging. The best conditions are: temperatures between 15 and 35 ºC; humidity between 35 and 65 %. If the product is not stored under these specifications, it is advisable to condition it in the workshop for at least 24 hours before use, to prevent condensation. The pallets can be stored in 2 levels (1/1). CPIC recommends that the material be used according to FIFO (first in, first out) method. It is recommended the use of a spacer plate (10mm) between the pallets.
- PACKAGING
Each roll of roving is wrapped by shrinkage packing or tacky-pack, then put into pallet or carton box, 48 rolls or 64 rolls each pallet.
- Glass Type
- ECT/ECR/TM
- Sizing Type
- Silane
- Technology
- Composite Materials
- Certifications
- ISO 9001
- ISO 14001
- OHSAS 18001
- Identification
Example: ECT 469HT-2400 ECT: Boron Free E – Glass 469HT: CPIC sizing reference 2400: Linear nominal weight of roving (Tex)
- Packaging Type
- Cartons
- Rolls
- Totes (IBC)
- Labeling Claims
- Boron-free
- Benefits
- Low fuzz
- Fast wet out
- Multi-resin compatible
- Certifications and Compliance
- ISO 14001
- ISO 9001
- OHSAS
- Compatible Polymers and Resins
- Polyesters
- Vinyl Esters
- Composite Materials Functions
- Reinforcement
- Composites Processing Methods
- Pultrusion
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Filament Diameter | ±1 | % | ISO1888 |
| Filament Diameter | 27 | μm | — |
| Moisture Content | max. 0.10 | % | ISO3344 |
| Tensile Strength (<1200Tex) | min. 0.40 | N/Tex | ISO3341 |
| Tensile Strength (≥1200Tex) | min. 0.40 | N/Tex | ISO3341 |
| Linear Density | 8800 | tex(g/km) | — |
| LOI | 0.6 | % | — |
