Master Touch 92R16 Red Oxide
- Chemical Family
- Alkyds, Alkyds (Modified)AlkydsAlkyds (Modified)
Master Touch 92R16 Red Oxide is a modified alkyd primer for OEM market and general industrial products that require a high performance coating. The 92R16 Primer exhibits excellent color retention, hardness and corrosion resistance. Product is lead and chrome free and contains strontium zinc phosphate for extra corrosion resistance.
Product families
- Primers & Sealers
Other characteristics
- Brand
- Master Touch
- Features
Color Retention, Corrosion Resistant, Fast Drying, High Hardness, High Performance
- Product Type
- Primer
- Application Method
- Dip Coating, Spray
- Usage
Use xylol, aromatic solvent or MEK for cleaning guns and equipment.
- Color
- Red
- Drying
Optimum drying conditions are 60°F to 90°F (16°C to 32°C) at 50% R.H. Lower temperatures and high humidity will slow dry. Surface must be dry and at least 5°F above the dew point. Dry to Touch 15-30 minutes. Product may also be force cured to enhance dry. Temperatures in the range of 110-180°F may be utilized to accelerate solvent evaporation and speed oxidation.
- Markets
- Automotive & Transportation
- Printing & Packaging
- Technology
- Ready-to-Use Products
- Labeling Claims
- Chrome-free
- Lead-free
- Mixing and Thinning
Stir each container thoroughly prior to use. Material is packaged at a viscosity requiring little of no reduction for application by spray equipment. Solvents of choice are toluol, xylol, SC-100 and SC-150. For cool weather conditions (below 65°F) use xylol. For temperatures above 80o F, xylol may still be used, but SC- 100 or SC-150 can be used as a retarder solvent to reduce dry spray and increase flow and leveling. Limit the level of SC-150 to 5% as a retarder solvent. VM&P naptha may also be used, but higher levels to achieve the same viscosity reduction will be required vs. aromatic solvents. To store partially used container, pour a small amount of the recommended thinner over the surface. Do not stir. Replace lid securely. Store away from heat or open flame. Mix thoroughly before reusing. 92R16 Primer may also be catalyzed with Polyurethane Converter to create a hard, solvent and chemical resistant finish that is free from "after tack". Mix 8 parts primer to one part Polyurethane Converter (8000) by volume. Use within a four-hour time period. Due to short pot life, never leave catalyzed paint in spray equipment. Clean immediately! Do not spray catalyzed material with heated spray equipment.
- Application Methods
- Dip Coating
- Spray
- Surface Preparation
General: surfaces to be finished must be clean, dry and free of dirt, oil or any contamination that would adversely affect adhesion, protective properties or appearance of the coating.
- Ready to Use Product Features
- Color Retention
- Corrosion Resistant
- Fast Drying
- High Hardness
- High Performance
