Master Touch 90C05 Clear Base
- Chemical Family
- Alkyds, Alkyds (Modified)AlkydsAlkyds (Modified)
MasterTouch 90C05 Clear Base is a high performance, fast drying silicone modified enamel designed for high temperature applications that require a coating to withstand continuous temperatures of up to 400°F with no loss of adhesion. However temperatures over 250°F may cause discoloration in some colors. This high performance product is single component and meets V.O.C. regulations of 5.42 lbs/gal (650g/l) for high temperature coatings.
Product families
Applications
- Agricultural & Construction Equipment
- Primers & Lacquers
Product Families
- Enamels
- Primers & Sealers
Other characteristics
- Brand
- Master Touch
- Features
Color Retention, Excellent Chalk Resistance, Excellent Gloss Retention, Excellent Substrate Adhesion, Exceptional UV Resistance, Fast Drying, High Durability, High Performance, High Temperature Performance, Low VOC, Thermal Shock Resistant
- Product Type
- 1K (1 component) Coating, Enamel, Primer
- 1K (1 component) Coating
- Enamel
- Primer
- Application Area
Furnace, Heat Exchangers, Incinerators, Mufflers, Pipes; Furnace; Heat Exchangers; Incinerators; Mufflers; Pipes
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Metal
- Usage
Applications include O.E.M. heat exchangers, stack, incinerators, furnace exteriors, hot piping, mufflers, exhausts and other elevated temperature metal surfaces. Excellent for cookers, smokers and gas grills because of its excellent gloss and color retention.
- Color
- Transparent
- Markets
- Paints & Coatings
- Printing & Packaging
- Technology
- Ready-to-Use Products
- Benefits
- Withstands Temperatures Up to 400°F
- Silicone Modified
- Excellent Resistance to U.V. Exposure
- Can be Used as a Primer and Finish
- Will Air Dry or Can be Force Cured or Baked
- Excellent Flexibility for Thermal Shock
- Fast Drying for Increased Production Time
- Extremely Durable
- Application Methods
- Brush
- Roller
- Spray
- Surface Preparation
Surface must be clean and dry. All substrates must be cleaned free of dust, dirt, oil (including form oils & parting compounds), grease, soap residue, wax and flaking paint. Scuff sand slick, hard, glossy surfaces to promote adhesion. Sandblast or wire-brush rusty surfaces. Solvent wipe and /or detergent clean surface with 12 Paint Prep (Water-based Solvent Degreaser) according to SSPC-SP1. For optimum adhesion and corrosion resistance, rusted metal should be either sandblasted SSPC-10 and obtain a 1 to 1.5 mit (25-40 micron) blast profile. No primer is required but can be applied over inorganic zinc rich primer for increased performance. Refer to Surface Preparation Guide for more detailed instructions.
- Ready to Use Product Features
- Color Retention
- Excellent Chalk Resistance
- Excellent Gloss Retention
- Excellent Substrate Adhesion
- Exceptional UV Resistance
- Fast Drying
- High Durability
- High Performance
- Compatible Substrates and Surfaces
- Metal
