Agrol Lubricants Ultra Truck
Agrol Lubricants Ultra Truck is a synthetic ultra high performance diesel engine oil (UHPD) of the highest quality for vehicles that work under very demanding operating conditions and with extremely long replacement intervals. It has low levels of sulfate ash, sulfur and phosphorus, so-called Low SAPS. This makes it extra suitable for Euro IV, V and VI engines with exhaust gas cleaning systems, e.g. particulate filter (DPF) and various types of catalysts (SCR). Ultra Truck has good low temperature properties and works well for cold starts and works well with biofuels. Ultra Truck is developed to be fuel efficient.
Product families
Applications
- Automotive Fluids & Lubricants
- Other Lubricants & Fluids
Product Families
- Lubricants & Oils
Other characteristics
- Features
Consistent High Quality, High Performance, Low SAPS, Low Temperature Performance
- Product Type
- Oil
- Application Area
- Diesel Engine
- SAE Viscosity Grade
- SAE 10W
- Markets
- Automotive & Transportation
- Technology
- Ready-to-Use Products
- Base Oil
- Synthetic Oil
- Characteristic
Ultra Truck is primarily developed to meet the highest requirements for extended replacement intervals where the quality level ACEA E9, E6, E7 or E4 is required. The unique additive technology with low levels of sulfate ash, sulfur and phosphorus provides significantly longer service life than conventional oils for the exhaust gas purification systems used to meet Euro VI emissions requirements. This in combination with fully synthetic base oil gives the product very high quality. Ultra Truck keeps the engine clean and counteracts wear in the engine.
- Recommendations
Ultra Truck is especially recommended for engines with exhaust gas systems according to Euro VI where an oil that complies with ACEA E9. It can also be used to advantage for heavier vehicles with supercharged diesel engines that work under harsh conditions or run with extended, oil change intervals according to ACEA E9, E6, E7, E4 and API CJ-4.
- Ready to Use Product Features
- Consistent High Quality
- High Performance
- Low SAPS
- Low Temperature Performance
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Bastal (TBN) | 12.9 | mg KOH/g |
| Density (15°C) | 855.0 | kg/m3 |
| Flash Point | 214.0 | °C |
| Lowest Flow Temperature | -45.0 | °C |
| Sulfate Ash Content | 1.0 | % |
| Viscosity (100°C) | 12.2 | mm2/s |
| Viscosity (40°C) | 70.4 | mm2/s |
| Viscosity Index | 167.0 | — |
