Deuteron® SO 100
Deuteron® SO 100 is a liquid formulation containing fine elastomer particles dispersed in DPGDA (dipropylene glycol diacrylate), serving as an acrylic functional carrier. This dispersion of fine elastomer particles is specifically designed for formulating soft-feel coatings. It's available in variations such as water, solvents, and acrylic functional monomers, offering flexibility in formulation and application.
Properties
- Physical Form
- Suspension
Identification
- CASE Ingredients Functions
- Flattener
Product families
- Surface Modifiers
Other characteristics
- Brand
- Deuteron
- End Uses
- Radiation Curable Coating
- Features
Good Antiblocking Properties, Good Surface Feeling, Improved Chemical Resistance, Improved Flexibility, Improved Mechanical Resistance, Matting, Recoatability
- Functions
- Flattener
- Carrier
- Dipropylene Glycol Diacrylate (DPGDA)
- Use Levels
- 10 - 30 %
- Appearance
- Yellow suspension
- Shelf LIfe
- 12 months
- Cure
- Radiation Cure
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- HIGHLIGHTS
Deuteron® SO 100 is a liquid preparation of fine elasto- mer particles in DPGDA (dipropylene glycol diacrylate) as acrylic functional carrier. The used elastomer particles impart a rubber-like feel to any coating film. Depending on the addition level it is possible to achieve pleasant soft touch effects even in extreme hard and brittle systems without compromising the film toughness.; The use of Deuteron® SO 100 and its unique soft-feel approach eliminates the need for special soft and elastic resins as it works with almost any given system. This opens up a wide range of formulation freedom to design soft-touch systems with outstanding durability.; Deuteron® SO 100 is an easy to use liquid that is suitable for the use in auto dosage units. The dispersion is made without using dispersing additives or defoamers and thus highly compatible without negative influence on the coating performance.
- Packaging Information
- Steel Drum (25 kg net)
- Steel Drum (200 kg net)
- Coating End Applications
- Radiation Curable Coating
- Handling Conditions
12 months in original sealed containers at room tem- perature and dry conditions.. Storage temperature should not exceed 35 °C. Deuteron® SO 100 can show some phase separation after storage. Thus, it is highly recom- mended to stir the material before use.
- Application and Dosage
Deuteron® SO 100 can be used in all UV curable systems (free radical polymerisation). The matting and soft-touch effects are largely independent of the applied film thick- ness and it is possible to combine Deuteron® SO 100 with common surface additives such as waxes or other mat- ting agents to impart soft-touch with minimal impact on the overall system performance.; The use of Deuteron® SO 100 especially improves performance in:; Soft-touch effects independent on the used binders; Matting; Good recoat ability; Excellent mechanical and chemical resistance; Temperature stable up to 160 °C; Anti-Blocking; Insoluble in common solvents; Flexibilization; Dosage; 10 - 30 % (calculated on the complete formulation) depending on binder, application and required properties.; The optimum dosage depends on the binder system and the desired surface character. It must be determined by own tests for the respective system. Higher addition levels lead to stronger effects and increased flexibility.; As Deuteron® SO 100 is highly compatible, even very high dosages up to 60 % can be used to generate extreme effects.; Processing; Deuteron® SO 100 is easy to disperse and can be incor- porated using a common high-speed stirrer. It is possible to add Deuteron® SO 100 at any stage of the production process, even post addition to adjust properties at a customer line is possible. Deuteron® SO 100 does not stabilize foam.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Active Content | 30.0 | % | — |
| Density | approx. 1.04 | g/cm³ | — |
| Viscosity | approx. 2500 | mPa.s | — |
| Particle Size (dv 50) | approx. 7.0 | μm | — |
| Particle Size (dv 90) | approx. 15 | μm | — |
| Hydroxide Content | approx. 2.1 | % | Calculated on the Solid Content |
