Deuteron® OG 863
- CASE Ingredients Features
- Enhanced Surface SmoothnessExcellent Scratch ResistanceGood Surface ProtectionHigh GlossImproved HardnessImproved Mechanical ResistanceMattingPolishing ResistanceRecoatability
- Chemical Family
- Polymethyl Urea
Deuteron® OG 863 comprises fine PMU (polymethyl urea) particle dispersions within isopropanol. These dispersions are generally suitable for various solvent-based applications where rapid evaporation of alcohol is acceptable. Preferred applications for this product family include flexographic inks, wood coatings, industrial coatings, and textile printing, especially for small labels.
Properties
- Physical Form
- Dispersion
Product families
- Surface Modifiers
Other characteristics
- Brand
- Deuteron
- End Uses
Flexography Ink, Solventborne Coating, Waterborne Coating
- Features
Enhanced Surface Smoothness, Excellent Scratch Resistance, Good Surface Protection, High Gloss, Improved Hardness, Improved Mechanical Resistance, Matting, Polishing Resistance, Recoatability
- Labeling Claims
- Biodegradable, Silicone-free, Wax-free
- Biodegradable
- Silicone-free
- Wax-free
- Carrier
- Isopropanol
- Solvent-based
- Markets
- Paints & Coatings
- Printing & Packaging
- Use Levels
- 1.0 - 5.0 %
- Appearance
- White dispersion
- Shelf LIfe
- 12 months
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- HIGHLIGHTS
The Deuteron® OG 863x product family is a series of fine PMU (Polymethyl urea) particle dispersions in Isopro- panol. In the product family three different grades with different particle size distributions are available. The va- riety of different particle size distributions enable formulators to find the right particle size distribution for many different applications down to extremely thin films.. The use of our PMU chemistry leads to high hardness, low COF (coefficient of friction) products that are able to maintain high gloss levels.
- Packaging Information
- Steel drum (20 kg net)
- Coating End Applications
- Solventborne Coating
- Waterborne Coating
- Ink and Toner End Applications
- Flexography Ink
- Compatible Substrates and Surfaces
- Wood
- Handling Conditions
12 months at room temperature and dry conditions.. Storage temperature should not exceed 35 °C. Stir well before use as phase separation can occur while storing.
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Weight | approx. 0.92 | g/cm³ |
| Particle Size (dv 99) | 12.5 | µm |
| Active Content | approx. 32 | % |
| Particle Size (dv 50) | approx. 3.5 | μm |
