Biowert AgriPlast NFNI 3070 40000HM
- Chemical Family
- PolyestersPolylactic Acid (PLA)
Biowert AgriPlast NFNI 3070 40000HM is made up of 30% cellulose fibers obtained from meadow grass and 70% PLA(polylactic acid).
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Housewares; Consumer Goods — Other Consumer Goods Applications
- Interior
- Consumer Electronics
Product Families
- Biodegradable Polymers
- Polyesters & Copolyesters
Other characteristics
- Density
- 1280.0 - 1280.0 kg/m³
- Polymer Name
- Polylactic Acid (PLA)
- Labeling Claims
- Biodegradable, Residues-free
- Biodegradable
- Residues-free
- Fillers Included
- Cellulose, Natural Fiber
- Cellulose
- Natural Fiber
- Processing Methods
- Injection Molding
- Usage
AgriPlast NFNI 3070 40000HM granules can be used with any injection molding machine and processed into molded components such as spoons, consoles, machine cases, protective caps, etc. The granules can also be dyed any color.
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Features
AgriPlast granules can be used with any injection molding machine and processed into molded components such as spoons, consoles, machine cases, protective caps, etc. The granules can also be dyed any color.; Ideal ease of flow for injection molding.; High cycle times when manufacturing complex molded parts; AgriPlast is lighter than comparable fibreJreinforced composite plastics.; Fire protection without antimony and halogen.; Recyclable and residueJfree disposal when incinerated.
- Technology
- Plastics
- Material Features
- Biodegradable
- Excellent Cycle Time
- Flame Resistant
- Light Weight
- Recyclable
- Plastics and Elastomers End Uses
- Consoles
- Consumer Applications
- Electronic Accessory Cases
- Kitchenware
- Tool/Tote Box
- Plastics and Elastomers Processing Methods
- Injection Molding
- Processing Notes
Sufficiently dry at 70 – 80 °C, heating zones of 200 °C decreasing to 170 °C, possible shortJterm peak melting temperature of 210 °C, molding temperature of 40 – 50 °C, avoid frictional and shearing heat, make sure the tool is well ventilated.
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 3845 | MPa | DIN EN ISO 527 |
| Tensile Strength | 34,1 | MPa | DIN EN ISO 527 |
| Strain at Tensile Strength | 1,4 | % | DIN EN ISO 527 |
| Flexural Modulus | 4151 | MPa | DIN EN ISO 178 |
| Bending Strength | 64,9 | MPa | DIN EN ISO 178 |
| Bending Strain at Bending Strength | 2,3 | % | DIN EN ISO 178 |
| Charpy Impact Strength Unnotched | 7,2 | kJ/m2 | DIN EN ISO 179 |
| Charpy Impact Strength Notched | 2,8 | kJ/m2 | DIN EN ISO 179 |
| Vicat Softening Point | 166 | °C | DIN EN ISO 306 Vicat B/50 |
| Density | 1,28 | g/cm3 | DIN EN ISO 1183 |
