FASTEX® FBOG150
FASTEX® FBOG150 is a premium, extreme pressure GEAR OIL for Industrial and Marine service. It is formulated from high viscosity index (VI) paraffinic base oils and blended with a Fastex® Surface Modifier. This proprietary Extreme Pressure (EP) & Anti-Wear (AW) package is used to provide very high load and wear protection to the gear sets and bearings against seizure and surface distress. Protects equipment against thermal damage and corrosion. Proven results for FASTEX® FBOG150 confirm a long service life and dramatically reduced oil change frequencies.
Product families
Applications
- Equipment & Parts
- Marine Fluids & Lubricants
- Marine
Product Families
- Lubricants & Oils
Other characteristics
- Brand
- FASTEX
- Features
Anti-Wear Properties, Chemical Resistant, Corrosion Resistant, Extreme Pressure Performance, Low Friction, Oxidation Resistant, Service Life Extension, Shock Resistant, Sludge Build-up Prevention, Varnish Build-up Prevention; The Fastex® Surface Modifier protects against metal-to-metal contact.; Exceptional shock load protection; Quick separation from water to resist forming permanent emulsions; Extremely high-level resistance to oxidation and chemical degradation; Non-Corrosive to steel and non-ferrous gear set components; Resists sludge and varnish formation at high temperatures; The exceptional low friction characteristics contribute to reduced energy consumption.; Proven performance extends to service and maintenance intervals.
- Product Type
- Oil
- Application Area
Gears, Hydraulic Pumps, Industrial Conveyors, Marine Applications; Gears; Hydraulic Pumps; Industrial Conveyors; Marine Applications
- Compatible Substrates & Surfaces
- Metal, Steel
- Markets
- Automotive & Transportation
- Industrial
- Precaution
FASTEX® FBOG150 should be stored in dry conditions, under cover, at above freezing temperatures & away from ignition sources. To avoid contamination, drum and can lids should be closed tightly.
- Technology
- Ready-to-Use Products
- Packaged Sizes
- 1.1 US Gal
- 5.3 US Gal
- 55 US Gal
- 264 US Gal
- ISO Viscosity Grade
- ISO 150
- Performance Specifications
FASTEX® FBOG150 meets or exceeds the following performance specifications:; US Steel 224; AGMA 9005-D94; GM LS2; Cincinnati-MilacronP-77; Flender; Hanson; Bijur Applicators
- Ready to Use Product Features
- Anti-Wear Properties
- Chemical Resistant
- Corrosion Resistant
- Extreme Pressure Performance
- Low Friction
- Oxidation Resistant
- Service Life Extension
- Shock Resistant
- Compatible Substrates and Surfaces
- Metal
- Steel
- The Surface Modifier Technology
It is a complex package of esters combined with a highly refined and modified hydrocarbon-based fluid, specifically formulated to improve Boundary Lubrication. It both significantly reduces friction and improves the anti-wear characteristics of metal surfaces. This modified surface has a much higher shear strength to protect equipment and improve operating performance. It protects against thermal damage traditionally caused by extreme loading pressures, oil film breakdown or lubricant failure by providing low friction and good anti-wear barrier between metal surfaces.
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity (40°C) | 148.9 | cSt | ASTM D-445 |
| Viscosity (100°C) | 15.5 | cSt | ASTM D-445 |
| Viscosity Index | 106.0 | — | ASTM D-2270 |
| Flash Point | 464.0 | °F | ASTM D-92 |
| Pour Point | -22.0 | °F | ASTM D-97 |
| Four Ball EP Test (Load Wear Index) | 53.0 | — | ASTM D-2783 |
| Four Ball EP Test (Last Non-Scizure Load, Scar) | 100.0 | kg | ASTM D-2783 |
| Four Ball EP Test (Last Scizure Load, Scar) | 250.0 | kg | ASTM D-2783 |
| Four Ball EP Test (Weld Load) | 315.0 | kg | ASTM D-2783 |
| Rust Prevention (Procedure A) | PASS | — | ASTM D-665 |
| Rust Prevention (Procedure B) | PASS | — | ASTM D-665 |
