Aexcel HIGH SOLIDS RED EPOXY PRIMER
- Chemical Family
- Epoxy & Epoxy Derivatives
Aexcel High Solids Red Epoxy Primer is a high solids, two component, low VOC (2.1 lbs/gal) polyamide primer. Resulting in a highly corrosion resistant coating. The primer has excellent adhesion over properly prepared cold rolled steel.
Product families
Applications
- Primers & Lacquers
Product Families
- Primers & Sealers
Other characteristics
- Features
Acid Resistant, Alkali Resistant, Corrosion Resistant, Excellent Substrate Adhesion, Good Adhesion, Good Weather Stability, High Solids Content, Humidity Resistant, Long Potlife, Low VOC, Solvent Resistant
- Product Type
2K (2 component) Coating, Epoxy Coating, Primer, Solventless & High Solids Coating; 2K (2 component) Coating; Epoxy Coating; Primer; Solventless & High Solids Coating
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Steel
- Usage
High build primer up to 5 mils DFT over abrasive blasted cold rolled steel where topcoat is required. No induction time and long pot life improves productivity. Spray application with minimal dry overspray.
- Markets
- Printing & Packaging
- Storage
Store at room temperature. Keep From Freezing. Aexcel high solids epoxy may settle. Mix each component thoroughly using a shear mixer at low speed before activating.
- Technology
- Ready-to-Use Products
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Coverage Rate (1 mill Dry Film Thickness) | 855.0 | sq./ft. per gl. |
| Coverage Rate (3 mills Dry Film Thickness) | 285.0 | sq./ft. per gl. |
| Coverage Rate (5 mills Dry Film Thickness) | 171.0 | sq./ft. per gl. |
| Flash Point | 40.0 | °F |
| Gloss (60°,3 mils) | 15.0 | — |
| VOC/Gallon activated system | 2.09 (251) | lb./gl. (g/l) |
| VOC/Gallon Part A | 2.3 (283) | lb./gl. (g/l) |
| Volume Solids activated | 51.3 - 55.3 | % |
| Weight Solids activated | 68.5 - 72.5 | % |
| Weight/Gallon Catalyzed system | 11.70 - 12.10 | lbs. |
| Weight/Gallon Part A | 12.73 - 13.13 | lbs. |
