Click Bond CB200-40 - CB200 40ml Acrylic Adhesive Cartridge
- Chemical Family
- Acrylics & Acrylates
Click Bond CB200-40 - CB200 40ml Acrylic Adhesive Cartridge is a two-part thixotropic paste adhesive capable of bonding a wide variety of metals, engineering thermoplastics, and composites. CB200 cures quickly at room temperature and exhibits excellent environmental and chemical resistance. CB200 adhesive replaces welding, riveting, and other mechanical fastening methods.
Properties
- Physical Form
- Paste
Product families
- Structural Adhesives
Other characteristics
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive, Structural Adhesive
- 2K (2 component) Adhesive
- Structural Adhesive
- Compatible Substrates & Surfaces
- Composites, Metal, Plastics
- Cure
Cure Time at 75°F (24°C): 30 minutes to handling strength; 2 hours to 90% of ultimate strength; 24 hours to full cure.; Air Dry
- Markets
- Adhesives & Sealants
- Packing
CB200 is packaged in an 8:1 cartridge and is recommended for installation of Click Bond adhesive-bonded fasteners.
- Storage
Store CB200 below 72°F (22°C) in a dry place when not in use. Refrigerated storage is recommended for maximum shelf life. DO NOT FREEZE.
- Features
ABS Type Approved Product; Bonds a wide variety of metals, engineering plastics, and composites; Cures quickly at room temperature.; Bonds irregular shapes and inaccessible surfaces; Excellent environmental and chemical resistance; Water resistant
- Shelf LIfe
CB200 has a shelf life of 6 months when stored in the original package at 72°F (22°C). Shelf life can be extended to one year by refrigeration at between 35°F and 50°F (2°C and 10°C).
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Ready to Use Product Features
- Chemical Resistant
- Fast Cure
- Good Weather Stability
- Outdoor Durability
- Thixotropic
- Water Resistant
- Compatible Substrates and Surfaces
- Composites
- Metal
- Plastics
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Working Time (75°F (24°C)) | 5 | minutes | — |
| Handling Strength | 30 | minutes | — |
| Full Cure | 24 | hrs. | — |
| Shear Strength | 4400(30.3) | psi(MPa) | ASTM D1002 |
| Peel Strength | 21(3.74) | pli(kN/m) | ASTM D1876 |
| Service Temperature Range | (-55) - 121 | °C | — |
