HCF™ Heat Cure FDA Compliant
HCF™ Heat Cure FDA Compliant is a scientifically formulated coating that uses nanotechnology to create a semi-permanent barrier on the surface of a mold which is only 100 nanometers in thickness and which facilitates extraordinary plastic or rubber part release. HCF coating can be used where food or medical applications are needed, and is designed to be applied when the mold is out of the press.
Product families
Applications
- Tooling & Moldmaking
Product Families
- Top Coats
Other characteristics
- Brand
- HCF
- Features
Corrosion Resistant, Good Release Properties, Low Friction, Non Stick; Excellent Release; Softer than HC resulting in faster wear for harder or filled materials.; Thermoplastics; Commodity Grades; Engineering Grades; Cure time 3-4 hours; Cured with hot air; Application on an unheated surface.; Application best when not in the press and on an unheated mold.; Limited ability to bond to plated or pretreated surfaces.; Multiple coats are possible.; Solvent Carrier; Polymer Film; Up to 500K Cycles; Temperatures up to 1000°F.
- Product Type
- Solventborne Coating, Top Coat
- Solventborne Coating
- Top Coat
- Markets
- Industrial
- Cure
- Heat Cure
- Availability
- NANO10HCF – 10 ml kit
- NANO15HCF – 15 ml kit
- NANO25HCF – 25 ml kit
- NANO50HCF – 50 ml kit
- Kits Include
- Nano Mold Coating
- Mold Coating Remover
- Micro Fiber Cloths
- Micro Fiber Swabs
- Dropper
- Pump sprayer
- Technology
- Ready-to-Use Products
- Certifications and Compliance
- FDA Compliant
- Ready to Use Product Features
- Corrosion Resistant
- Good Release Properties
- Low Friction
- Non Stick
