URE-SEAL H2O™ – Mid-Gloss
- Chemical Family
- Urethanes
URE-SEAL H2O™ – Mid-Gloss has excellent abrasion and chemical resistance with a gloss, mid gloss, or natural finish (Keep in mind that the ‘Gloss’ blend will appear as semi-gloss when applied on brick pavers). The mild odor makes it ideal for interior applications. Ure-Seal H2O will not yellow and will form a very hard protective coating for high traffic areas, counter tops, restaurants, decorative concrete & brick pavers. Ure-Seal H2O can be used over epoxy flooring, garage floors, anywhere that high durability and superior chemical resistance is required
Other characteristics
- Brand
- URE-SEAL H2O
- Features
Abrasion Resistant, Chemical Resistant, Cleanable, Good Non-Yellowing Properties, Good UV Resistance, High Durability, High Performance, Low Odor, Low VOC, Medium Gloss
- Product Type
- 2K (2 component) Coating, Sealer
- Application Area
- Countertop Flat Stocks
- Application Method
- Roller, Spray
- Compatible Substrates & Surfaces
- Concrete
- Usage
ICT Ure-Seal H2O is a 2-part environmentally friendly water reducible, crystal clear, alaphatic urethane. It is a high performance clear coating that can be used inside or out to protect and enhance any properly prepared decorative concrete, brick pavers, and many other concrete & masonry surfaces for years of service.
- Color
- Transparent
- Markets
- Paints & Coatings
- PACKAGING
- 1 Gallon Kits
- 2.5 Gallon Kits
- 5 Gallon Kits
- Test Data
- Delta E Change: None Delta Gloss Change: None
- Appearance
- Clear (Dry), Milky (Wet)
- Shelf LIfe
- 1 Year (77°F)
Technical data
Table 1 of 2
13 rows| Characteristic | Value | Unit |
|---|---|---|
| Weight | 8.8 | lbs./gal. |
| V.O.C. | max. 50 | g/L |
| Combined Solids (A&B) | 44 - 46 | % |
| Gloss (60°F Specular) | 50.0 | — |
| Dry time (77°F, 50% RH) | 3 - 6 | hours |
| Dry to Recoat | min. 3 - 6 /max. 18 - 24 | hours |
| Return to Service | 24 - 48 | hours |
| Heavy/Vehicular Traffic | 72 | hours |
| Coverage | 200 - 300 | sq. ft./gal. |
| WFT | 5 - 8 | mils |
| DFT | 2.1 - 3.3 | mils |
| Hot Tire Resistance | Excellent | — |
Table 2 of 2
9 rows| Characteristic | Value | Method |
|---|---|---|
| Acetic Acid (10%) | No effect | ASTM D1308 |
| Sulfuric Acid (10%) | No effect | ASTM D1308 |
| Hydrochloric Acid (10%) | No effect | ASTM D1308 |
| Sodium Hydroxide (50%) | No effect | ASTM D1308 |
| Ammonium Hydroxide | No effect | ASTM D1308 |
| Bleach (10%) | No effect | ASTM D1308 |
| Gasoline | No effect | ASTM D1308 |
| Brake Fluid | No effect | ASTM D1308 |
| Skydrol | No effect | ASTM D1308 |
