Instaquim DS Plus
Instaquim DS Plus is a liquid product for disinfection by spraying surfaces and materials that have to be decontaminated frequently or in cases in which for particular reasons disinfectants cannot be applied by direct contact.
Properties
- Physical Form
- Liquid
Product families
Applications
- Surface Care
- Industrial Cleaning
- Institutional & Catering
Product Families
- Commercial Cleaners
- Industrial Cleaners
Other characteristics
- Features
- Anti-Bacterial, Anti-Fungal
- Product Type
- Disinfectant Products
- Application Area
- Equipment, Hard Surfaces
- Equipment
- Hard Surfaces
- Certifications & Compliance
- EU Ecolabel
- Usage
- Use in food industry.
- Contact disinfection: surfaces and equipment.
- For professional use.
- Markets
- HI&I Care
- Appearance
- Transparent Colorless Liquid
- Regulations
Meets the standard UNE-EN 13697 in clean conditions for the microorganisms Escherichia coli, Staphylococcus aureus, Enterococcus hirae and Pseudomonas aeruginosa.; Meets the standard UNE-EN 14476 in dirty conditions for the organisms Poliovirus type 1, Adenovirus type 5 and Norovirus murino.; Registration number 19-20/40-06527 HA.
- Presentation
- 10L
- 4X5L
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Jerrycan
- Labeling Claims
- Confirms to ECO-Label
- Main Components
- Contains propan-2-ol - 45.00%
- Didecyldimethylammonium chloride - 0.10%
- Excipients - 100.00%
- Application Methods
- Spray
- Handling Precautions
Do not swallow; H226 - Flammable liquid and vapor.; H319 - Causes serious eye irritation.; H336 - May cause drowsiness or dizziness.; P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P235 - Keep cool.; P271-P261C - Use only outdoors or in a well-ventilated area. Avoid breathing vapors.; P280E - Wear protective gloves and eye protection. In case of inadequate ventilation wear respiratory protection.; P403+P233 - Store in a well-ventilated place. Keep container tightly closed.; P501C - Dispose of contents/container as hazardous waste.; Do not mix with other chemicals.
- Certifications and Compliance
- EU Ecolabel
- Dosage and Use Instructions
Spray the clean surfaces or materials from a distance of 40 cm to form a uniform film, leave it for 5 min. for bactericidal action or 15 min. for bactericidal, fungicidal and virucidal action, and wipe with a single use paper.. Do not spray on hot surfaces or in presense of flames.
- Ready to Use Product Features
- Anti-Bacterial
- Anti-Fungal
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| pH Value | 6.5 - 8.5 | — |
| Density (20°C) | 0.9 - 0.94 | g/ml |
