Honey Wax®
Honey Wax® is a unique, high gloss paste wax for use by the reinforced fiberglass molder as a mold release agent. It is compounded with the purest grade carnauba wax, plus special binders and spreading agents. Honey Wax reduces man hours due to its exceptional ease of application and buffing. It is an excellent mold release agent providing reproducibility, glossiness, and a non-staining, hard releasing film which are important to the fabricator. It is easier to apply and remove than other processed waxes and the residual film is resistant to abrasion. Honey Wax® creates a durable wax surface that remains intact for multiple pulis.
Properties
- Physical Form
- Solid
- Wax
Product families
Applications
- Interior Fixtures
- Flexible Packaging Adhesives
- Flexible Packaging Adhesives
- Marine
Product Families
- Performance Additives
- Performance Additives
Other characteristics
- Brand
- Honey Wax
- End Uses
- FRP Boats, Release Film
- Functions
- Mold Release Agent, Release Agent
- Markets
- Adhesives & Sealants
- Automotive & Transportation
- Building & Construction
- Printing & Packaging
- Storage
Reseal the lid tightly when not in use to avoid solvent evaporation and loss in performance. For more information, please refer to our Material Safety Data Sheet.
- Availability
Honey Wax® is available in 14-ounce cans, 12 cans per case
- Technology
- Elastomers
- Plastics
- Mold Preparation
It is essential that the mold surface be thoroughly cleaned so that all traces of previous waxes used and/or other release agents or any foreign materials are removed. KantStik® Mold Cleaner will remove waxes and wax residue. It should be noted, however, that the Kantstik® Mold Cleaner breaks down the wax and, therefore, residue must be removed from the mold surface. A clean cloth should be used for this purpose to ensure that the dissolved wax is completely removed and not merely being spread.. Continue the process until the surface is completely clean. To test the surface for cleanliness, use a piece of masking tape on various points on the mold surface. Good adhesion to the mold should be observed when removing tape. If not, further cleaning is necessary.
- Composites End Use
- FRP Boats
- Material Features
- Abrasion Resistant
- Durable
- Good Adhesion
- Good Stain Resistance
- High Gloss
- Plastics and Elastomers End Uses
- Release Film
- Plastics and Elastomers Functions
- Mold Release Agent
- Release Agent
