Elba Lubrication ELBAPLEX ECS 15
Elba Lubrication Elbaplex ECS 15 is specially designed for high speed bearings which operate in a wet ambience. It is also specially designed for spindles, cams, joint and turbines. Extremely suitable for the lubrication of spindles in CNC machines ElbaPlex ECS 15 greases is recommended for their performance in combination with metal working emulsions. Particularly suitable for the lubrication of spindle and tapered roller bearings, threaded spindles, ball screws subject to high loads, and for all high-speed bearings in OE -spinning for Textile industry.
Product families
Applications
- Equipment & Parts
- Textile Manufacturing
- Other Parts & Components
- Renewable Energy
Product Families
- Greases
Other characteristics
- Features
- Low Temperature Performance
- Product Type
- Grease
- Thickener Type
- Polyurea
- Application Area
- Bearings, Cams
- Bearings
- Cams
- Markets
- Electrical & Electronics
- Industrial
- Texture
- Smooth
- Key Features
100% PAO 6 Base Stock for outstanding low-temperature properties & high-speed application.; Superior protection from rust and corrosion, Good pump ability Long life grease.; Excellent resistance to water washout and spray off. Corrosion protection; Exceptional thermal stability over a wide temperature range.; Environmentally friendly since the formulation contains no antimony, barium, chlorine,; Phosphorus, zinc or free sulfur excellent behavior to temperatures.
- Technology
- Ready-to-Use Products
- Ready to Use Product Features
- Low Temperature Performance
Technical data
Table 1 of 2
24 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 4-Ball EP (LWI) | 0.45 | kgf | ASTM D2596 |
| EMCOR Corrosion (3% NaCl) | 2.2 | — | ASTM D6138 |
| Hardness Change (Durometer A points) | 2.4 | — | — |
| Elastomer Compatibility | 4.8 | — | ASTM D4289 |
| Base Oil Viscosity (40°C) | 4.9 | cSt | ASTM D445 |
| Base Oil Viscosity (40°C) | 22.5 | cSt | ASTM D445 |
| Worked Penetration (10,000 Double Strokes with 10% Water, % Change) | 25.0 | % | ASTM D217 |
| Bomb Oxidation (100 hours at 99°C, PSI Drop, Oil) | 30.0 | — | ASTM D942 |
| Roll Stability (% change) | 50.0 | % | ASTM D1831 |
| Viscosity Index | 141.3 | — | ASTM D445 |
| Timken OK Load | 400.0 | kg | ASTM D2509 |
| CR Type 70 hours at 100°C | -1.6 | — | AMS 3217/3B |
Table 2 of 2
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Temperature Torque (-18°C) | 4.0 | N.m | ASTM D4693 |
