Menzolit® SMC 1100
- Chemical Family
- Polyesters
menzolit® SMC 1100 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn't melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.
Product families
Applications
- Exterior & Body
- Interior
- Interior Fixtures
- Other Building Materials
- Equipment & Parts
- Other Industrial Applications
Product Families
- Sheet Molding Compounds (SMC)
Other characteristics
- Brand
- Menzolit
- End Uses
- Door Panels, Doors, Side Panels, Tanks
- Functions
- Molding Compound
- Processing Methods
- Compression Molding
- Reinforcement Material
- Glass Fibers, Mineral
- Glass Fibers
- Mineral
- Markets
- Automotive & Transportation
- Building & Construction
- Industrial
- Polymer Name
- Thermoset Polyester
- Technology
- Composite Materials
- Supply Form
menzolit® SMC 1100 is produced in a standard width of 1500 mm. It is supplied on rolls holding up to 1500 kg. It is possible to have it folded and packed in cardboard/wooden crates. In any case a styrene barrier film wrapping is being used. For alternative packaging please contact our technical service team. Available in limited colors.
- Packaging Type
- Rolls
- Labeling Claims
- Halogen-free
- Composites End Use
- Door Panels
- Doors
- Side Panels
- Tanks
- Certifications and Compliance
- REACH (Europe)
- SVHC Compliant
- Composite Materials Functions
- Molding Compound
- Composites Processing Methods
- Compression Molding
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistivity | 10^12 | Ohm | IEC 60093 |
| Comparative Tracking Index | CTI600 | Level | IEC 60112 |
| Continuous Service Temp | 170 | °C | Menzolit |
| Density | 1.8 | g/cm³ | ISO 1183 |
| Flex Modulus | 13 | GPa | EN ISO 14125 |
| Flexural Strength | 250 | MPa | EN ISO 14125 |
| Heat Distortion Temp | min. 200 | °C | EN ISO 75-2 |
| Impact Strength | 120 | kJ/m² | EN ISO 179 |
| Shrinkage | 0.05 | % | ISO 2577 |
| Tensile Strength | 150 | MPa | EN ISO 527-4 |
| Water Absorption | max. 0.3 | % | ISO 62 |
| Young’s Modulus | 13 | GPa | EN ISO 527-4 |
