GloPrill® Saturn Yellow (GPF34)
GloPrill® GPF Series are the first ever FDA compliant colorants for use in PP and HDPE. GPF will offer all the same benefits of our standard GloPrill® product and more.
Properties
- Physical Form
- Prills
- Solid
Product families
Applications
- Printing & Packaging — Other Printing & Packaging Applications
- Food & Beverage Manufacturing
Product Families
- Organic Pigments
- Pigments & Colorants
Other characteristics
- Brand
- GloPrill
- Color
- Pink, Yellow
- Pink
- Yellow
- Functions
- Effect Pigment
- Pigment Type
- Organic Pigments
- Processing Methods
- Blow Molding, Injection Molding
- Markets
- Food & Nutrition
- Printing & Packaging
- Technology
- Pigments & Colorants
- Plastics
- Labeling Claims
- Clean Label
- Food Contact Acceptable
- Formaldehyde-free
- Material Features
- Dust-Free
- Food Contact Acceptable
- Free Flowing
- Good Processability
- HIGHLIGHTS
GloPrill® GPF Pigments are the first FDA compliant colorants developed especially for use in polypropylene and high-density polyethylene food contact applications. The GPF Pigments may be used at loadings up to 1.0 % by mass in HDPE and PP resins in contact with all food types under conditions of use E-G defined in 21 CFR 176.170(c). When used as intended, the GPF pigments comply fully with the Federal Food, Drug, and Cosmetic Act and all applicable regulations. Designed with the plastics concentrate / masterbatch producer in mind, the GPF pigments offer brilliant, clean fluorescent color with superior processing properties. The GPF pigments offer continuous high-speed production, virtually eliminate blow-pin and mold cavity plate-out and enable the formulator to simplify their product by removing expensive and hard to use additives. An expanded fluorescent color palette may be achieved by combining the GPF pigments with other FDA compliant chromophores.
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- FDA 21 CFR 176.170
- Plastics and Elastomers Functions
- Effect Pigment
- Conditions E-G from 21 CFR 176.170(c)
E Room temperature filled & stored, (No thermal treatment in the container) F Refrigerated Storage, (No thermal treatment in the container) G Frozen Storage, (No thermal treatment in the container)
- Plastics and Elastomers Processing Methods
- Blow Molding
- Injection Molding
- Suggested Blends to Create Other Fluorescent Shades
- ** Use compliant grades
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bulk Density (at 0.67g / cm³) | 41.63 | lbs/ft³ | — |
| Heat Stability | 550 | °F | — |
| Melt Index | 22 | g/10min | ASTM D1238 |
| Processing Temperature | min. 300 | °F | — |
