To catalogue
TEXALAN® 390A
- Chemical Family
- Polyurethanes (PU)
Texalan® 390A This product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high pressure resistance, and Flexibility.
Product families
Applications
Applications
- Consumer Goods — Footwear; Consumer Goods — Furniture; Paints & Coatings — Other Paints & Coatings Applications
Automotive & Transportation — Automotive
- Other Automotive Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Printing & Packaging — Packaging
- Other Packaging Materials
Electrical & Electronics — Wire & Cable
- Building Wires & Power Cables
Product Families
Plastics — Thermoset Resins
- Polyurethanes
Other characteristics
- Brand
- TEXALAN
- Density
- 1210.0 - 1250.0 kg/m³
- End Uses
Automotive Applications, Automotive Exterior Parts, Belts/Belt Repair, Cables, Film, Flexible Packaging, Pipes
- Polymer Name
- Polyurethane (unspecified)
- Tensile Strength
- 40.0 - 40.0 MPa
- Processing Methods
- Extrusion, Injection Molding
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Industrial
- Paints & Coatings
- Printing & Packaging
- Technology
- Plastics
- Application Field
Conveyor belts, pipes, sealing rings, cables, blending modification, auto parts, casters, shoe materials, films, melt coating, encapsulation.
- Material Features
- Good Abrasion Resistance
- Good Flexibility
- Oil Resistant
- Solvent Resistant
- Processing Recommendation
The product needs to be dried at 80-110℃ for 3-4 hours before production; Injection molding processing recommendations; Extrusion processing recommendations
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Belts/Belt Repair
- Cables
- Film
- Flexible Packaging
- Pipes
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 100% Elongation | 7 | Mpa | ISO37 |
| 300% Elongation | 12 | Mpa | ISO37 |
| Abrasion Loss | 105 | mm³ | ISO4649 |
| Compression and permanent deformation at 70°C | 55 | % | ISO815 |
| Tear Strength | 115 | KN/m | ISO34 |
| Tensile Strength | 40 | Mpa | ISO37 |
| Ultimate Elongation | 450 | % | ISO37 |
Table 2 of 2
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.21 - 1.25 | g/cm³ | ISO1183 |
| Hardness | 87 - 93 | Shore A | ISO868 |
