To catalogue
NORSODYNE® FIREBLOCK I 81268 F
NORSODYNE® FIREBLOCK I 81268 F - Unsaturated Polyester Resin in styrene filled,without halogeneous component and antimony trioxide. It is used as general purpose in injection molding,rtm method.
Product families
Applications
Building & Construction — Building Envelope & Roofing
- Glazing & Window Elements
- Shingles & Tiles
Building & Construction — Building Materials
- Fence Decks & Rails
- Interior Fixtures
- Pipes & Plumbing
- Siding & Trim
- Structural Components
- Wall Panels
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Building & Construction — Infrastructure, Roads & Paving
- Pavement Highways Roads & Bridges
Industrial — Oil, Gas & Mining
- Refining & Gas Processing
Industrial — Power, Water & Utilities
- Power & Utilities
- Renewable Energy
Automotive & Transportation — Transportation
- Rail & Mass Transit
Product Families
Composite Materials — Polymers & Resins
- Thermoset Resins
Other characteristics
- Brand
- NORSODYNE
- End Uses
- Pipes, Structural Components, Tanks
- Polymer Name
- Polyester (unspecified)
- Processing Methods
- Resin Transfer Molding (RTM)
- Markets
- Automotive & Transportation
- Building & Construction
- Industrial
- Shelf LIfe
- 4 Months (23°C in Dark )
- Technology
- Composite Materials
- Product Safety
The final Fire resistance properties could change following the final structure of the piece and its use's condition. It will be necessary to verify the final properties on a prototype before industrial production.
- Composites End Use
- Pipes
- Structural Components
- Tanks
- Handling
Store in the shade, out of direct sunlight; Keep storage temperature below 25°C; Unseal container just before use; Shelf life will be reduced reaching higher temperature
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Resin Transfer Molding (RTM)
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solid Content | 65 - 69 | % | MT-CU001C |
| Specific weight at 20°C | 1,39 | g/cm3 | — |
| Brookfield Viscosity at 23°C, sp 3 rpm 50 | 550 - 750 | mPa.s | MT-CU025V |
| Gel Time at 23°C + 1,2% Co 1% + 1,5% MEKP50 | 16 - 22 | minutes | MT-CU152R |
| Peak at 23°C + 1,2% Co 1% + 1,5% MEKP50 | 23 - 33 | minutes | MT-CU152R |
| Exothermic peak at 23°C + 1,2% Co 1% + 1,5% MEKP50 | 115 - 145 | °C | MT-CU152R |
Table 2 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation at break at 80°C for 16h / +2h at 140°C | 0,72 | % | ISO 527 (2012) |
| Tensile strength at 80°C for 16h / +2h at 140°C | 25 | MPa | ISO 527 (2012) |
| Tensile Modulus at 80°C for 16h / +2h at 140°C | 3479 | MPa | ISO 527 (2012) |
| Flexural strength at 80°C for 16h / +2h at 140°C | 60 | MPa | ISO 178 (2011) |
| Flexural modulus at 80°C for 16h / +2h at 140°C | 3276 | MPa | ISO 178 (2011) |
| HDT at 80°C for 16h / +2h at 140°C | 129 | °C | ISO 75 -2A (2013) |
